Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
- Introduction
   Cars Citroyon Xantia - the summary
   Acquisition of spare parts and identification numbers of the car
   Technology of performance of repair procedures
   Tools and the workplace equipment
   Operations procedure in extreme situations
   Поддомкрачивание and towage
   Change of wheels
   Start of the engine from an auxiliary source
   Identification of leaks
   Preparation of the car for checkup
   Diagnostics of malfunctions of knots and car systems
   Features of the countries PDD of Europe
+ The operation manual
+ Routine maintenance
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ Electric equipment schemes





Change of wheels

The site of a spare wheel and working tools can vary, depending on a car complete set, however the general order of performance of procedure remains identical to all models of cars of mark Citroёn Xantia.

Preparation

• At a wheel puncture try to stop the car as soon as possible.
• Park the car away from проезжей parts on an equal horizontal platform, whenever possible with a firm covering.
• In case of need include the alarm system and expose on проезжей parts before a parking place warning triangle.
• Cock a lay brake and switch transmission to the first or a reverse gear (РКПП), or in position “Р” (АТ).
• Prop up противооткатными boots a wheel located on a diagonal from subject replacement (as a last resort, the pair of wooden wedges or stones of sufficient size will approach).
• Start the engine and translate a control lever a hydropneumatic drive of a suspension bracket in the position corresponding to the maximum size of a road gleam.
• In case of a soft covering of a platform enclose under a heel of a jack something like a piece of a firm board for loading distribution.

Order of performance of procedure

Site баллонного a key in a back part of a luggage space

Easing of a bolt assembly скобы fastenings of a spare wheel

Extraction of a spare wheel from assembly скобы

It is necessary to translate a control lever of a hydropneumatic drive of an active suspension bracket in the position corresponding to the maximum road gleam

Easing of bolts of fastening of a wheel

The jack is stored in a disk of a spare wheel

The jack head should be got in specially strengthened point of a threshold

Jack raising it is necessary to achieve, that the wheel subject to replacement completely has come off the earth

Отдавание wheel bolts and removal of a decorative cap

At installation of a spare wheel track hit of directing pins of a nave in reciprocal apertures in a wheel disk

The tightening of wheel bolts should be made with the help динамометрического a key with observance of demanded efforts

In summary

• Take from under wheels противооткатные boots.
• Lay on regular places the tool and the failed wheel.
• Check up pressure of a rating of a spare wheel. At absence near at hand an exact manometre on slow speed adjust the car for check to the nearest car repair shop where the given check can be made.
• At the first possibility give a punctured wheel for repair in шиномонтажную a workshop.

On the main page