Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
- 7. Start and gymnastics system
   7.1. A technical characteristics
   7.2. A finding of malfunctions in electric chains
   + 7.3. The accumulator
   + 7.4. The generator
   + 7.5. A starter
   7.6. Replacement of the lock of ignition
   7.7. Removal and installation of the gauge of pressure of oil
   7.8. Removal and installation of the gauge of level of oil on models with 16th valves
   - 7.9. The electric equipment of diesel engines 16D, 16DA, 17D and 17DR
      7.9.1. A technical characteristics
      7.9.2. Removal and accumulator installation
      + 7.9.3. A starter
      7.9.4. Check of system of preliminary heating
      7.9.5. Replacement of candles накаливания
      7.9.6. Removal and installation of the switch of a control bulb of pressure of oil
      7.9.7. Check, removal and installation of a temperature-sensitive element of the fan of a radiator
      7.9.8. Check of the fan of a radiator
      7.9.9. Removal and installation of the gauge of temperature of a cooling liquid
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

7.9.1. A technical characteristics
THE GENERAL DATA

Type of candles накаливания
Models with the engine 16D and 16DA
Champion CH-68 or similar
Models with the engine 17D and 17DR
Champion CH-68 or similar
Starter
The manufacturer and type
Bosch GF or DW
Capacity
12 Volts, 1,7 kw
The minimum diameter of a collector:
  – Type GF
33,5 mm
  – Type DW
31,2 mm
The minimum length of brushes:
  – Type GF
10,0 mm
  – Type DW
8,0 mm
Temperature-sensitive element of the fan of a radiator
Models with the engine 16D and 16DA:
  – Fan inclusion
97 ° WITH
  – Fan deenergizing
93 ° WITH
Models with the engine 17D and 17DR:
  – Fan inclusion
100 ° WITH
  – Fan deenergizing
95 ° WITH

The tightening moments

Starter
Bolts of fastening of a starter to the block of cylinders:
  – On the engine party
45 Nanometers
  – On the transmission party
75 Nanometers
Fixing arm:
  – Fastening to the block of cylinders
25 Nanometers
  – Fastening to a starter
7 Nanometers
Candles накаливания
Models with the engine 16D and 16DA
40 Nanometers
Models with the engine 17D and 17DR
20 Nanometers
Wire connection to a candle
4 Nanometers
Other elements
The gauge of pressure of oil
30 Nanometers


On the main page