Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
- 7. Start and gymnastics system
   7.1. A technical characteristics
   7.2. A finding of malfunctions in electric chains
   + 7.3. The accumulator
   + 7.4. The generator
   + 7.5. A starter
   7.6. Replacement of the lock of ignition
   7.7. Removal and installation of the gauge of pressure of oil
   7.8. Removal and installation of the gauge of level of oil on models with 16th valves
   - 7.9. The electric equipment of diesel engines 16D, 16DA, 17D and 17DR
      7.9.1. A technical characteristics
      7.9.2. Removal and accumulator installation
      + 7.9.3. A starter
      7.9.4. Check of system of preliminary heating
      7.9.5. Replacement of candles накаливания
      7.9.6. Removal and installation of the switch of a control bulb of pressure of oil
      7.9.7. Check, removal and installation of a temperature-sensitive element of the fan of a radiator
      7.9.8. Check of the fan of a radiator
      7.9.9. Removal and installation of the gauge of temperature of a cooling liquid
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





7.9.4. Check of system of preliminary heating
THE GENERAL DATA

The scheme of system of preliminary heating

Н16 – An alarm bulb,

К25 – The relay,

М12 – A starter,

R5 – Candles накаливания,

Y5 – The blocking solenoid,

3 – from the accumulator,

8 – from the lock of ignition,

15 – a food,

20 – a safety lock,

30 – a food

Designations of colour of wires

BL – dark blue,

BR – brown,

GE – yellow,

RT – red,

SW – black,

VI – violet

Mixing chambers of the engine are warmed up before start of the engine by means of electric candles накаливания. At key turn in the ignition lock in position On on a combination of devices the control bulb of system of preliminary heating lights up. When the bulb will go out, the engine is ready to start.

For inclusion of candles накаливания the relay established on a back wall of a motor compartment or near a rack of a forward suspension bracket is used.

The relay of candles накаливания is established on a back wall of a motor compartment.

The relay of candles накаливания is established near the top fastening of one of racks of a forward suspension bracket.

Check

MODELS WITH THE ENGINE 16D AND 16DA, AND ALSO EARLY MODELS WITH THE ENGINE 17D

PERFORMANCE ORDER
1. At inclusion of ignition of a candle накаливания should consume a current in 8–9 And.
2. Remove a checked candle and fix it on the block of cylinders (the fastening place is specified by an arrow).
3. Connect плюсовой probe the ampermeter to the candle plug.
4. Connect minus probe the ampermeter to плюсовой to the plug of the accumulator and check up, that the candle tip накаливания became red approximately in 5 seconds. Approximately in 15 seconds the current strength should decrease with 25 And to 12 And.

MODELS WITH THE ENGINE 17DR AND 17D

For check of candles накаливания on these models it is necessary to address to experts.

On the main page