For heating of back glass for the purpose of removal of a touch of a moisture or ice, press the button.
The ignition key should be in position On.
Under the influence of heat allocated with thin delays of a thermoelement, mounted on an internal surface, there is a fast enlightenment of glass. At inclusion of an electroheater of back glass the control lamp on the panel of devices lights up.
Deenergizing of an electroheater of back glass is provided with repeated pressing the button. Switch off an electroheater right after glass enlightenments, heater inclusion for long term leads to the battery category, especially at short trips. The heater is not intended for glass drying at a rain, or for растапливания snow.
The prevention Include a heater only on the working engine.
At wiping of back glass do not damage a thermoelement. |