Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   - 7.4. A transmission
      - 7.4.1. Type 014 four-speed transmission
         7.4.1.1. Removal and dismantling
         7.4.1.2. Dismantling and assemblage of a primary shaft
         7.4.1.3. Dismantling and assemblage of a secondary shaft
         7.4.1.4. Assemblage and synchronizer dismantling
         7.4.1.5. Dismantling and differential assemblage
         7.4.1.6. Transmission assemblage
         7.4.1.7. Selection of a thickness of adjusting rings of back bearings
         7.4.1.8. The gear change lever
         7.4.1.9. Adjustment and installation of the mechanism of management by a gear change
      + 7.4.2. A five-speed transmission of type 013 or 093
      + 7.4.3. A five-speed transmission of types 016 and 012
      + 7.4.4. The mechanism of management of gear change КП of type 016
      + 7.4.5. An automatic transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment



7.4.1.8. The gear change lever
THE GENERAL DATA

The mechanism of management of gear change КП of type 014

1 – the handle;
2 – a lock ring;
3 – a washer;
4 – a spring;
5 – a bolt;
6 – a washer;
7 – the hinge case;
8 – a cover;
9 – a rubber holder;
10 – the gear change lever;
11 – the case;
12 – a nut;
13 – a washer;
14, 15 – bolts;
16 – a nut;
17 – jet draught;
18 – draught of a gear change;
19 – a cover;
20 – муфта;
21 – the screw;
22 – a side scene;
23 – the plug;
24 – a bolt

The lever of a gear change and draught КП of type 014

1 – блокиратор backing inclusions;
2 – a persistent plate;
3 – a washer;
4 – a nut;
5 – the case;
6 – a washer;
7 – a bolt;
8 – a nut;
9 – the plug;
10 – a bolt;
11 – the gear change lever;
12 – the hinge in gathering;
13 – a washer;
14 – a bolt;
15 – a spring;
16 – a spring cup;
17 – a lock ring;
18 – the handle;
19 – the hinge case;
20 – a fixing ring;
21 – a rubber holder;
22 – the top hemisphere;
23 – a spring;
24 – a cover;
25 – the bottom hemisphere

Removal

PERFORMANCE ORDER
1. To note in axial and angular directions position of draught 18 (fig. the Mechanism of management of gear change КП of type 014 see) gear changes in клеммовом connection, then to turn away a bolt клеммового connections.
2. To remove the central console (subitem 1-8 or subsection 11.23 subitem 10-15 see).
3. To turn away a nut 4 (fig. the Lever of a gear change and draught КП of type 014 see) and to remove washers 3.
4. To remove the case 5 together with the gear change lever in gathering.
5. To turn away a nut 8, to take out a bolt 10 and to remove draught of a gear change.

Dismantling

PERFORMANCE ORDER
1. To turn away the handle 18 (fig. the Lever of a gear change and draught КП of type 014 see) gear change lever.
2. To remove a lock ring 17 and a spring 15 with a cup 16.
3. To take out the lever of a gear change 11 of the hinge 12.
4. To mark a relative positioning of the case 19 hinges and cases 5 and to turn away two bolts 14.
5. To remove the hinge 12 in gathering from the case 5.
6. To shift a rubber holder 21 and a fixing ring 20 downwards.
7. To move apart two halves of a cover 24 in a rubber holder 21 and to take out hemispheres 22 and 25 with a spring 23.
8. To take out halves of a cover 24 of a rubber holder 21.

Assemblage

PERFORMANCE ORDER
1. To insert into a rubber holder 21 (fig. the Lever of a gear change and draught КП of type 014 see) two halves of a cover 24.
2. Having moved apart covers 24, to insert подсобранные bottom 25 and the top 22 hemispheres with a spring 23.
3. To insert подсобранный the hinge into the case 19 and to fix its ring 20.
4. To insert the lever of a gear change 11 into the hinge 12.
5. To establish the spherical hinge 12 with the gear change lever in gathering on the case 5 on earlier made labels and to wrap bolts 14.

Installation

PERFORMANCE ORDER
To establish the gear change lever upside-down.

On the main page