|
1) by means of a screw-driver take away the support lever against the stop on both back wheels |
| |
|
2) a rope of a parking brake will pull too strongly if the lever of one of supports departs from an emphasis (it is specified by an arrow) |
|
|
3) ослабьте an adjusting nut of a rope of a parking brake (it is specified by an arrow) so that both levers have fallen on an emphasis |
|
4) insert a screw-driver in diameter at least 6 mm between a back hook of a spring and the bearing |
| 5) press a pedal of a brake about 40 times (the engine is muffled) |
| 6) check up, that both wheels rotated freely |
| 7) remove a screw-driver |