Audi 80/90/Coupe
+ 1.2. Car identification
- 2. Engines, carburettors
2.1.2. Removal and engine installation (5-cylinder models)
2.1.3. Dismantling and assemblage of engines
2.1.4. A head of the block of cylinders, the mechanism timing
- 2.2. An engine electric equipment
2.2.2. A tension клинового a belt
2.2.3. A klinovoj belt of the generator of an alternating current
2.2.4. A regulator of pressure of the generator of an alternating current
2.2.5. The vacuum amplifier
2.2.6. Vacuum final valves
2.2.7. The switches established on a steering column
2.2.8. Check of vacuum system
+ 2.3. Carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment
|
Removal
| PERFORMANCE ORDER |
|
1) on cars with the 4-cylinder engine remove the pump together with rubber linings upwards and aside from a fixing arm; on cars with the 5-cylinder engine remove the pump downwards from a fixing arm |
| 2) remove a protective plate from below on a left-hand side of an instrument guard |
| 3) remove an electronic socket of connection from the vacuum final valve |
|
4) with the help "J" the-shaped tool remove the valve behind from the plug
|
|
Installation
| PERFORMANCE ORDER |
| 1) establish the valve a hand |
|
2) screw the valve in the plug as it is possible further by means of a key on 10 mm |
| 3) pull a pedal of a brake (coupling) back as it is possible further |
| 4) slowly release a pedal |
| 5) the valve is adjusted now |
|
|
On the main page
|