Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation


Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
- Devices and auxiliary devices
   Check of indicators and signalling devices
   Elements of a combination of devices
   Speedometer
   Tachometre
   Hours
   The indicator of quantity of fuel
   The indicator of temperature of a cooling liquid
   Voltage stabilizer
   Additional devices
   The top indicators in a combination of devices
   The indicator of a cooling liquid
   The indicator of brake system
   The indicator of pressure of oil
   Indicators of indexes of turns
   The bottom indicators
   The indicator of a charge of the storage battery
   The indicator of indexes of turn of the trailer
   The indicator of a pillow of safety
   The indicator of antiblocking system
   The headlight indicator
   The indicator of a lay brake
   Self-examination system
   Switches
   The ignition lock
   Check of switches
   Buzzer of switching-off of illumination and radio
   Cigar Lighter
   Heating of back glass
   Check of screen wipers and windscreen
   The screen wiper engine
   The list of malfunctions
   Screen wiper of back glass
   The list of malfunctions
   Replenishment of a tank of a washer of glasses
   System of washing of headlights
   Audiosystem
   The aerial of back glass
   Electric regulation of external rear-view mirrors
   System of locks with the central management
   Electric window raiser
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications

Replenishment of a tank of a washer of glasses

Constant check

Suspension from exhaust gases, evaporations of oil and silicone from conditioning agents behind a varnish are constantly postponed on glasses. In a warm season therefore it is recommended to add a washing-up liquid in water; the nonfreezing liquid in the winter is necessary.

After removal of a plastic cover of a water-proof casing there are accessible three fixing screws (1, 2 and 3) screen wiper levers.

On an illustration on the right the engine of a screen wiper (1) is removed from the lever. On a drive (2) carving apertures of fixing screws (arrow) are visible. As there should be a crank of a drive (3) at installation, shows drawing: displacement from a parallel on
a = 6 ° to an average axis of the engine.


 PERFORMANCE ORDER

  1. The bulk branch pipe for water is at the left in a motor compartment near to a broad tank of a cooling liquid. Into a tank enters about 4 l on the models which have been not equipped with system of washing of headlights if the car is equipped by similar system, the tank contains about 6,5 l.
  2. At first it is necessary to pour in a washing-up liquid, only then water that these liquids have well mixed up in a tank.
  3. If the car is not equipped by heating system впрыскных atomizers, they can freeze in strong frosts.
  4. For prevention of it the raised concentration of a nonfreezing liquid is recommended. The impurity денатурированного spirit can lead in a combination in antifreezing means to formation of flakes therefore atomizers can be hammered.
  5. Embedding of the usual petrol filter in the pipeline of system of washing of glasses prevents corking of washing atomizers.
  6. System of washing of back glass at Audi 80/Avant (versatile person): the tank for water with a rotary bulk branch pipe is under a cover on the right in a luggage compartment.

Regulation of a spraying stream

 PERFORMANCE ORDER

  1. To insert a needle into an aperture of a spraying atomizer.
  2. The aperture is in a ball which can be turned by means of a needle.
  3. To turn an atomizer until the water stream, as is shown in drawing, will not start to get on glass.

Warmed up электрически atomizers

Directly before atomizers there is a metal case with the heating resistor. With inclusion ignitions (plug) on this resistance the current arrives. Atomizers quickly thaw thanks to a high current strength arriving at first (0,5-0,7). For keeping of temperature the current strength after a heating phase falls to equal 200 мА. If the external temperature makes минус15°С and more low, the supporting current strength raises to 320 мА.

Search of malfunctions

 PERFORMANCE ORDER

  1. To separate штекерное connection to an atomizer.
  2. At the included ignition to check up the voltmeter, whether pressure arrives and whether contact on "weight" is perfectly in order.
  3. Otherwise to search for conducting damage.
  4. If with a food everything is all right, it is necessary to replace an atomizer.

Thus it is necessary to establish atomizers of system of washing of glasses:
And = 20 sm, b = 45 sm, with = 22 sm, d = 48 see


On the main page