Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
   - 10.1. A mechanical transmission
      10.1.1. A technical characteristics
      10.1.2. Oil replacement in a transmission
      10.1.3. Removal and installation of the lever of a gear change
      10.1.4. Removal and installation of a cable of blocking of inclusion of a reverse gear
      10.1.5. Removal, installation and adjustment of draught of a gear change
      10.1.6. Replacement of sealing rings
      10.1.7. Check, removal and installation of the switch of lanterns of a backing
      10.1.8. Removal and installation of a drive of a speedometer
      + 10.1.9. A transmission
   + 10.2. An automatic transmission
   + 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





10.1.6. Replacement of sealing rings

SEALING RING OF THE POWER SHAFT

PERFORMANCE ORDER
1. Establish the suitable container under a transmission.
2. Take the internal end of a power shaft from a transmission (subsection 10.3.2 see). Do not unscrew a nut of fastening of a power shaft to a nave.
3. Using a soft wire, adhere the internal end of a power shaft to a body.
4. Using a screw-driver edge as the lever, take a sealing ring from a transmission.
5. Clear a nest of a sealing ring.
6. Apply a thin film greasings on an external surface of a sealing ring.
7. Using tubular оправку the corresponding diameter, establish a sealing ring in a transmission.
8. Establish a power shaft.
9. Check up oil level in a transmission and, if necessary, finish it to norm.

SEALING RING OF THE ENTRANCE SHAFT OF THE TRANSMISSION

Subsection 9.4.1 and subsection 9.4.3 see.

On the main page