Opel Kadett E

1984-1991 of release

Repair and car operation

8.2.4. Adjustment of a corner of an advancing of ignition

THE GENERAL DATA

MODELS 1,3, 1,4 AND 1,6 L (16 SH) WITH THE CARBURETTOR AND MODELS 1,8 OF L (18) WITH SYSTEM OF INJECTION OF FUEL

The models working on leaded gasoline

Statically the corner of an advancing of ignition in contactless system of ignition cannot be checked up.

Dynamic check of a corner of an advancing of ignition can be made with stroboscope use. Keep in mind that the ignition distributor is fixed by two nuts instead of a tightening bolt.

On l models 1,4 there are two labels on a pulley of a cranked shaft. The first corresponds 10 ° to ВМТ, and the second – 5 ° to ВМТ.

On models with contactless distributors of ignition check of a corner of the closed condition of contacts is not required.

The models working on неleaded gasoline

The engines established on cars, can work on высокоOCTANESом неleaded gasoline.

On l models 1,3 (13 N and 13 NB) with a low compression reinstallation of a corner of an advancing of ignition is not required. On all other models it is recommended to make adjustment of a corner of an advancing of ignition according to following principles.

PERFORMANCE ORDER

1. In the presence of a detonation in engine cylinders it is necessary to reduce a corner of an advancing of ignition on 3 °. 2. If the detonation in cylinders still occurs, it is necessary to reduce a corner of an advancing of ignition even more.

OTHER MODELS

On other models the corner of an advancing of ignition can be checked up a stroboscope, but corner adjustment is not provided. If the corner of an advancing of ignition does not correspond demanded, it is necessary check and adjustment to make on specialised servicing deport Opel.