Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
- 9. Coupling
   9.1. A technical characteristics
   + 9.2. A coupling cable
   9.3. Removal and installation of a pedal of coupling
   + 9.4. Coupling
   9.5. Removal and installation выжимного the bearing
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





9.3. Removal and installation of a pedal of coupling
PERFORMANCE ORDER
1. In a motor compartment measure length of a carving tip of a cable of the coupling, acting of the squeezing lever. This size is necessary for using for maintenance of correct installation of a cable of coupling.
2. Remove скобу, крепящую a carving tip of a cable of coupling to the squeezing lever, and remove from the lever a carving tip. For simplification of removal move the lever to the engine.
3. In car salon remove the bottom panel of furnish in deepening for feet of the driver.
4. On the right side of an axis of a pedal of coupling remove fixing скобу, then unscrew a nut of fastening of a pedal and remove a washer.
5. Take an axis of a pedal of coupling from an arm, then lower downwards a pedal and a returnable spring.
6. Note an arrangement of washers and linings on an axis of a pedal of coupling for their repeated installation on the places.
7. Disconnect a cable of coupling from a coupling pedal, release a returnable spring and take a pedal of coupling and a returnable spring from the car.
8. Installation is made in sequence, return to removal.
9. Before installation grease an axis of a pedal of coupling with greasing on a basis дисульфида molybdenum.
10. If necessary adjust a coupling cable.

On the main page