Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Cars Subaru Legacy, Outback

The management is devoted cars Subaru Legacy and Outback to series В12 2001, 2002 вып.

Considered models are presented to two кузовных executions the Sedan (Legacy) and the Versatile person (Legacy and Outback) and of 2.0 l (Legacy) or 2.5 l (Legacy and Outback), or 6-cylinder, also оппозитным, the engine of 3.0 l (Outback) are completed 4-cylinder оппозитным with the engine the engine.

On all models the distributed system of injection with electronic control (MFI) is applied.

Transmission with a constant full drive on all wheels (AWD) is organised by means of a 5-step manual box of a gear change (РКПП), 5-step РКПП with an additional 2-step reducer (in the sum of 10 steps), or 4-step automatic transmission (АТ), a distributing box, interaxal differential (on some models of LSD-type), карданного a shaft, back differential and four power shafts.

The forward suspension bracket completely independent, rack-mount type with telescopic shock-absorbers (Poppy-ferson) and screw springs, is organised by means of a cross-section beam, cross-section levers and the stabilizer of cross-section stability.

Back suspension bracket multilever, rack-mount type, with telescopic shock-absorbers and the stabilizer of cross-section stability.
On some models as an additional complete set the pneumatic suspension bracket, in the present Management not considered is applied.

The steering drive is organised by means of реечной transfer and two cross-section steering draughts. The standard complete set includes system of hydrostrengthening of a wheel.

Brake mechanisms of all wheels have a disk design. The lay brake influences back wheels (drum-type assemblages). The vacuum amplifier of brakes and antiblocking system enter Into a standard complete set of all models (ABS).


On the main page