Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Body

The general information

Site анкерных скоб for fixing of a children's seat


And — Models Legacy of Universal/Outback In — Models the Sedan	1 — Ankernaja скоба

The scheme of drawing of the covering protecting a paint from having chopped off

Hermetic sealing of an impellent compartment

Cowl hermetic sealing

Hermetic sealing of doors

Hermetic sealing of a door of a back

Hermetic sealing of angular joints back кузовных panels (model Legacy the Versatile person and Outback)

Hermetic sealing of the top hatch (model the Sedan)

Hermetic sealing of forward panels of a floor

Hermetic sealing of back panels of a floor

Hermetic sealing back кузовных panels (model the Sedan)

The scheme of drawing of protective PVC-COVERING

The scheme of installation of anticorrosive protectors


1 — the Filter of a jellied mouth of a fuel tank 2 — Loker of protection of a forward wheel arch	3 — Filters of a fuel tank

The scheme of the organisation of ventilation of salon


1 — the Exhaust aperture	2 — air Stream

The standard complete set of all models of cars considered in the present Management includes system of additional safety (SRS). Before to start performance of any works near to blocks of pillows of safety, a steering column or the instrument panel, disconnect SRS in order to avoid reception of traumas at its casual operation (the Onboard electric equipment see the Head)! Electroconducting of chain SRS is easy for distinguishing on yellow colour of isolation.

The general procedures of repair and service get to limits of qualification of the average mechanic-fan кузовных components only most.

Durability and reliability

Semimonolithic body Legacy/Outback consists mainly of the stamped metal panels connected with each other by means of welding.

The frame design, образуемая a combination of longitudinal and bow-shaped cross-section beams, forms the zones of deformation absorbing the basic energy of blow at emergency collisions, and the rigid cabin, different the raised stability to shock deformations and providing reliable protection being in salon of the driver and passengers. Some from кузовных elements, the most vulnerable in case of failure, have болтовой fixture and can be easily replaced in an individual order. Number of such demountable components concern, bumpers, door panels, a cowl, a cover of a luggage space and forward wings.

Established in распор between forward racks the bearing beam provides a reliable support of a steering column, and also serves for decrease in intensity of the vibrations transferred to a steering wheel, and allows to limit a course of displacement of a column at a head-on collision.

According to requirements to safety of transportations of standard FMVSS255 (ISO-FIX), from above on the floor panel, under lateral in places of a back seat are provided анкерные скобы for fastening of a special seat (see сопр. An illustration), providing reliable fixing of children of younger age.

Noise isolation

The excellent noise isolation of salon is guaranteed by a two-layer design of the majority кузовных panels, and also application of sound-proof materials in a combination to the raised rigidity of a cabin. The protective bitumen covering of the bottom and the two-layer design of a back partition of an impellent compartment filled with bitumen also promote absorption of noise and provide an additional noise isolation of salon.

Colouring

Manufacturers of cars Legacy/Outback bring to attention of consumers more than ten standard colour scores of colouring of a body.

The paint is imposed in three layers (intermediate, base and top transparent). The Most part of applied paint and varnish coverings (ЛКП) concerns type "Metallic".

Open face-to-face surfaces and door thresholds are in addition processed by the special covering protecting top layer ЛКП from having chopped off.

Tightness

The technological apertures used at manufacturing and installation кузовных of panels, are reliably muffled that guarantees absolute tightness of salon, - check reliability of installation to the place of corresponding заглушек after performance кузовных works. Joints and interfaced surfaces кузовных panels are missed the mark by hermetic, or equipped by sealing elements.

Anticorrosive protection

Practically all кузовные panels at manufacturing are exposed to galvanic processing that appreciably raises their stability to corrosion influence.

The anticorrosive wax structure on the basis of bitumen processes arches of wheels and lateral joints vertical кузовных panels with panels of a floor and a car frame.

In addition wheel arches, the bottom party of thresholds, the central panels of the bottom and the bottom party of a well under a spare wheel are processed by structure on the basis of polyvinylchloride (PVC).

All loops, locks, also face surfaces separate кузовных elements (a cowl first line, bottom edges of wings and luggage space doors/covers) become covered by protective wax structure of hot drawing.

Separate кузовные elements are in addition protected from corrosion by special protectors.

Salon ventilation

With a view of the organisation of effective through ventilation of salon of the car from lateral faces of a back bumper are provided special, equipped дефлекторами exhaust apertures.

On the main page