Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Карданный () a shaft () and карданные hinges
   7.4. Back and forward axes
   7.5. The bearing, an epiploon and полуось the back bridge
   7.6. An epiploon of a reducer of the back bridge and a forward axis
   7.7. The back bridge
   7.8. Forward semiaxes
   7.9. Replacement of covers and SHRUS dismantling
   + 7.10. An electromagnetic drive of a forward leading axis (ADD-system)
   7.11. A forward reducer
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

7.11. A forward reducer

THE GENERAL DATA

Forward reducer

1. A socket of the switch of a drive
2. Vacuum hoses
3. Forward карданный a shaft
4. A hose сапуна
5. A back support
6, 14. A lock ring
7. Left полуось
8, 11 Lining
9. A drain stopper
10. The left forward support
12. The right forward support
13. A reducer
15. Right полуось

Removal and installation

PERFORMANCE ORDER

1. Lift the car and remove wheels.

2. Remove the bottom guard of the engine.

3. Merge oil from a reducer.

4. Disconnect карданный a shaft.

5. Remove semiaxes.

6. Disconnect a hose сапуна, turn away 2 bolts of the holder and disconnect a socket and vacuum hoses of an electromagnetic drive of a forward leading axis.

7. Establish under a reducer the cart with a jack.

8. Turn away a nut of a back support (a photo at the left) and nuts of two forward support (a photo on the right). Lower a reducer.

9. Installation is carried out upside-down.

On the main page