Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Карданный () a shaft () and карданные hinges
   7.4. Back and forward axes
   7.5. The bearing, an epiploon and полуось the back bridge
   7.6. An epiploon of a reducer of the back bridge and a forward axis
   7.7. The back bridge
   7.8. Forward semiaxes
   7.9. Replacement of covers and SHRUS dismantling
   + 7.10. An electromagnetic drive of a forward leading axis (ADD-system)
   7.11. A forward reducer
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes
мдф шпонированный спб дуб купить

7.7. The back bridge

Removal and installation

PERFORMANCE ORDER
1. Lift a back part of the car and establish supports under a body. Remove back wheels.
2. Prop up the cart with a jack the back bridge under картер a reducer.
3. Disconnect from a reducer карданный a shaft.
4. Disconnect from the bridge a spring dosing out перепускного the valve (subsection 8.10 see)
5. Disconnect and muffle hoses and tubes of brakes.
6. Remove back brake drums.
7. Disconnect a cable of a manual brake.
8. Disconnect a hose сапуна.
9. Disconnect and compress shock-absorbers.
10. Disconnect from a body a stabilizer cross-beam, cross-section and longitudinal bars.
11. Cautiously lower the back bridge.
12. Bridge installation is carried out upside-down.

13. Pump over brakes (subsection 8.14 see).


On the main page