Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
- 10. Brake system
   + 10.1.2. Shock-absorbers
   + 10.2. Technical characteristics
   10.3. Prorolling of hydraulic system
   10.4. Hydraulic tubes and hoses
   10.5. Brake overlays of forward brakes
   10.6. Brake overlays of back wheels
   10.7. Brake Pads back brakes
   10.8. A brake disk of a forward wheel
   10.9. A brake disk of a back wheel
   10.10. A brake drum of a back brake
   10.11. A support of a forward brake
   10.12. A support of a back brake
   10.13. The wheel cylinder of a back brake
   10.14. The main brake cylinder
   10.15. A brake pedal
   10.16. The vaakuumnyj amplifier
   10.17. The vacuum valve of a servoamplifier
   10.18. A rope of a manual brake
   10.19. The lever of a manual brake
   10.20. The valve of adjustment of pressure in a contour of back brakes (till 96 of century)
   10.21. The switch of fires of a stoplight
   10.22. The general description of system of antiblocking of brakes (ABS)
   10.23. System ABS elements
   10.24. The vacuum pump (diesel and petrol engines in volume 2,3)
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

10.23. System ABS elements
THE GENERAL DATA

THE HYDRAULIC MODULE
The prevention

On models with ABS disconnect the accumulator before the work beginning to prevent air hit in module ABS.


Removal

PERFORMANCE ORDER
1. Disconnect a socket of connection and "a weight" wire.
2. Mark hydraulic tubes and disconnect them from hydraulic module ABS.
3. Turn off fixing bolts and remove module ABS.

Installation

Installation is spent upside-down removals.

THE ELECTRONIC BLOCK OF MANAGEMENT

Removal

PERFORMANCE ORDER
1. Remove back sitting.
2. Release a fixing clip and disconnect a socket of connection of the electronic block of management.
3. Turn off fixing nuts / bolts (arrows) and remove the electronic block of management ABS.

Installation

Installation is spent upside-down removals.

GAUGES OF SPEED OF ROTATION OF FORWARD WHEELS

Removal

PERFORMANCE ORDER
1. Remove a corresponding wheel.
2. Remove a wire of the gauge from fastenings and disconnect a socket of connection of the gauge.
3. Remove the gauge and the fixing plug.

Installation

Installation is spent upside-down removals.

GAUGES OF SPEED OF ROTATION OF BACK WHEELS

Removal

PERFORMANCE ORDER
1. Remove a corresponding wheel.
2. Get a wire of the gauge from fastenings that it could be removed together with the gauge.
3. Remove the gauge and the plug.

Installation

Installation is spent upside-down removals.


On the main page