Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   - 9.1.2. Technical characteristics
      9.1.3. Prorolling of hydraulic system of a drive of deenergizing of coupling
      9.1.4. Coupling adjustment
      9.1.5. A coupling pedal
      9.1.6. The main cylinder of a drive of deenergizing of coupling
      9.1.7. The working cylinder of a drive of deenergizing of coupling
      9.1.8. A disk of coupling and a casing
      9.1.9. The vyzhimnoj bearing and the lever
      9.1.10. Malfunctions of coupling
   + 9.2. A Mehnichesky transmission
   + 9.3. An automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


9.1.7. The working cylinder of a drive of deenergizing of coupling Removal

PERFORMANCE ORDER
1. Press a hydraulic hose of the working cylinder.
2. Loosen the a nut of connection of a hydraulic hose on the cylinder.
3. Turn off a fixing bolt and remove the cylinder, having disconnected a hose.

Repair

PERFORMANCE ORDER
1. Remove a cover and a pusher.
2. Remove a fixing clip and remove the piston and a spring.
3. Clear elements of the cylinder and examine them on deterioration presence. Replace the cylinder if it is necessary.
4. Lower new consolidation in a hydraulic liquid and establish it on the piston.
5. Lower a spring and the piston in a hydraulic liquid and insert them into the cylinder.
6. Establish a new fixing clip.
7. Establish into place a pusher and a cover.

Installation

Installation is spent upside-down removals.

On the main page