Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   + 12.1. Electric equipment system
   - 12.2. Ignition system
      - 12.2.1. Transistor system of ignition
         12.2.1.1. Removal and installation of the distributor of ignition
         12.2.1.2. Dismantling and assemblage of the distributor of ignition
         12.2.1.3. Check and adjustment of a corner of an advancing of ignition
         12.2.1.4. Check of the coil of ignition
         12.2.1.5. Switchboard check
         12.2.1.6. Check of the gauge of the Hall
         12.2.1.7. Check of spark plugs
      + 12.2.2. Electronic system of ignition
      12.2.3. Contactless system of ignition FEI
   + 12.3. Electric schemes

12.2.1.7. Check of spark plugs
THE GENERAL DATA

Normal work of the engine in the big degree depends on a condition of spark plugs.

PERFORMANCE ORDER
1. Having turned out candles, examine them.
2. If the insulator of the central electrode of a candle is covered by a deposit of light brown or grey-steel colour, the carburettor means is adjusted correctly and the candle works normally.
3. Light grey or white colour of pollution of an insulator says that a mix very poor, a black deposit on a candle – a mix reenriched.
4. If electrodes and a candle insulator are made oily, it means that or the candle gives a spark with faults, or piston rings are worn out.
5. Candles before installation need to be cleared a metal brush, to wash out gasoline and to dry.
6. To adjust a backlash between candle electrodes, turning in a lateral electrode. To bend the central electrode it is impossible. To tighten candles it is necessary the moment 20 Н·м (2,0 кгс·м).


On the main page