Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
- 1.2. Car identification
   1. The maintenance instruction
   1.3. An arrangement of identification tablets
   1.4. The panel of devices
   + 1.5. Car service
   - 1.6. Independent service of the car
      1.6.2. A small-sized spare wheel
      1.6.3. Wheel replacement
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and dimensional fires
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back antifog headlights and tail light headlights in a luggage carrier cover
         1.6.5.6. Bulbs of illumination of licence plate
         1.6.5.7. A back lateral dimensional lantern
         1.6.5.8. A plafond of illumination of salon
         1.6.5.9. Bulbs for reading of cards
         1.6.5.10. Antifog headlights
         1.6.5.11. A lantern of illumination of an impellent compartment
         1.6.5.12. A lantern of illumination of a luggage carrier
      1.6.6. Radio tape recorder replacement
      1.6.7. Car lifting
      1.6.8. The general rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. The sizes
   1.10. Loadings
   1.11. The schedule of preventive servicing / of greasing of the car
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

1.6.5.2. Forward indexes of turns and dimensional fires
THE GENERAL DATA

Open a cowl and prop up it.

Remove casings from headlights.

To replace a bulb, get headlights of the index of turns and dimensional fire. For removal of headlights press on both clips in a direction of arrows, and simultaneously push out headlights forward.

Remove headlights.

Turn a cartridge with a bulb counter-clockwise and pull out it.

Press an old bulb into a cartridge, turn it counter-clockwise, get and establish a new bulb.

Insert a cartridge with a bulb into the case of a headlight and turn clockwise so that it densely became into place.

Establish into place a headlight of the index of turns and dimensional fire, having inserted clips into corresponding apertures and having inserted both plastic uvulas on the headlight case into their apertures. Insert a headlight as it is possible further.


On the main page