Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
- 1.2. Car identification
   1. The maintenance instruction
   1.3. An arrangement of identification tablets
   1.4. The panel of devices
   + 1.5. Car service
   - 1.6. Independent service of the car
      1.6.2. A small-sized spare wheel
      1.6.3. Wheel replacement
      + 1.6.4. Safety locks
      - 1.6.5. Replacement of bulbs
         1.6.5.1. Headlights of forward light
         1.6.5.2. Forward indexes of turns and dimensional fires
         1.6.5.3. A back block headlight on a back wing
         1.6.5.4. The central stoplight on back glass
         1.6.5.5. Back antifog headlights and tail light headlights in a luggage carrier cover
         1.6.5.6. Bulbs of illumination of licence plate
         1.6.5.7. A back lateral dimensional lantern
         1.6.5.8. A plafond of illumination of salon
         1.6.5.9. Bulbs for reading of cards
         1.6.5.10. Antifog headlights
         1.6.5.11. A lantern of illumination of an impellent compartment
         1.6.5.12. A lantern of illumination of a luggage carrier
      1.6.6. Radio tape recorder replacement
      1.6.7. Car lifting
      1.6.8. The general rules of towage
   + 1.7. Specifications
   1.8. Capacities
   1.9. The sizes
   1.10. Loadings
   1.11. The schedule of preventive servicing / of greasing of the car
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

1.6.5.8. A plafond of illumination of salon
THE GENERAL DATA

Models Aуди of 1986-1989

By means of a flat edge of a screw-driver press on a clip (it is specified by an arrow) in a switch direction.

For cars with the opening top hatch accurately insert a flat edge of a screw-driver between a right edge of a framework and the furnish panel. Squeeze out a framework.

Remove a framework of a lantern from the furnish panel.

Remove a bulb.

Insert a new bulb.

Establish a lantern framework having inserted at first the party with the switch, and then press on the second edge so that spring clips have become isolated.

Models Audi1990-1992 of years

Accurately insert a flat edge of a screw-driver between a right edge of a framework and the furnish panel (it is specified by an arrow). Squeeze out a framework.

For cars with the opening top hatch, insert a screw-driver edge on a framework left-hand side.

Remove a framework of a lantern from the furnish panel.

Remove a bulb.

Insert a new bulb.

Establish a lantern framework having inserted at first the party with the switch, and then press on the second edge so that spring clips have become isolated.


On the main page