|
|
Audi 80/90/CoupeSince 1986-1991 of releaseRepair and car operation |
|
|
Audi 80/90/Coupe + 1.2. Car identification + 2. Engines, carburettors 3. Greasing system + 4. Cooling system + 5. Fuel system + 6. An exhaust system + 7. Ignition system + 8. Transmission - 9. Suspension brackets, wheels 9.1.1. Elimination of a resonance / of vibration of a cross-beam (4-cylinder models) 9.1.2. Change of a design of a forward suspension bracket 9.1.3. Полуось 9.1.4. A suspension bracket rack 9.1.5. SHRUS 9.1.6. A suspension bracket rack (all-wheel drive models) 9.1.7. SHRUS (all-wheel drive models) + 9.2. A back suspension bracket - 9.3. Wheels and tyres 9.3.2. Disorder / a convergence of wheels + 10. Brake system + 11. A steering + 12. A body, salon + 13. A central air + 14. An electric equipment |
9.3. Wheels and tyres
|
| THE GENERAL DATA |
|
Model
|
The size of the tyre
|
Wheels
|
Depth of a disk / diameter of a ring of bolts of fastening of a wheel
|
|
Ауди-80
|
175/70 HR 14
|
5-1/2 J х 14*
|
45/108
|
|
Ауди-90
|
195/60 HR 14
|
6 J х 14
|
45/108
|
|
Spare wheel
|
115/70 R 15
|
4 J х 14
|
56/108
|
|
125/90 R 15
|
4 J х 14
|
45/108
|
* Wheels with steel disks
Wheel in gathering
|
1. The tyre
On forward wheels it is recommended to establish tyres with deeper protector Establish tyres only identical type and with identical drawing of a protector 2. A fixing spring for balancing грузика 3. Balancing грузик On cast disks грузики fasten by means of glue 4. A wheel cap |
5. A bolt of fastening of a wheel The inhaling moment: 110 H.м. М14 х 1.5 x 27.5 mm 6. A wheel disk 5-1/2J X 14, depth of a rim of 45 mm (for wheels with steel disks) 6 J X 14, depth of a rim of 45 mm (a disk from easy alloys) 7. The chamber valve Establish the new valve at wheel replacement |
Wheel with легкосплавным a disk
|
1. The tyre
With a view of safety of the tyre should be replaced only with steams On forward wheels it is recommended to establish tyres with deeper protector Establish tyres only identical type and with identical drawing of a protector 2. Balancing грузики For installation: clear a rim of a wheel of oil and greasing, remove a protective film with грузика and paste it on a disk 3. A legkosplavnyj disk – trellised design 6J х 14 |
4. A nave cap 5. A cap The blocking cylinder is established 6. The blocking cylinder It is established on a wheel bolt 7. A bolt of fastening of a wheel The inhaling moment: 110 H.м. М14 х 1.5 x 27.5 mm 8. The chamber valve Establish the new valve at wheel replacement |