Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
- Routine maintenance
   + Weekly checks
   - Car routine maintenance - petrol models
      Regular service
      Replacement of impellent oil and the oil filter
      Check of a condition of hoses, and revealing of sources of leaks
      Check of adjustment of coupling
      Check of level ATF
      Suspension bracket and steering drive
      Check of a condition of protective covers of power shafts
      Reading of memory of the block of self-diagnostics
      Replacement of the dust removal filter (model with К/В)
      Check of a condition of a coolant of a central air of air
      Replacement of spark plugs
      Check of a condition of system of ignition
      Check and adjustment of turns and quality of a mix of idling
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases
      Check of a condition and replacement of a belt of a drive of auxiliary units
      Greasing of the mechanism of a drive of deenergizing of coupling
      Condition check колодок brake mechanisms of forward and back wheels
      Check of serviceability of functioning and adjustment of a lay brake
      Trial runs
      Replacement трансмиссионной liquids АТ
      Greasing of locks and loops
      Replacement of a filtering element of an air cleaner
      Level check трансмиссионного oils (models with РКПП)
      Replacement of the fuel filter
      Replacement of hydraulic liquid LHM and the returnable filter
      Check of a condition of brake supports, disks and hydraulic hoses
      Replacement of a belt of drive ГРМ
      Replacement of a cooling liquid
   + Car routine maintenance - diesel models
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ Electric equipment schemes

Greasing of the mechanism of a drive of deenergizing of coupling

THROUGH EACH 30 000 KM (18 000 MILES) RUN

At occurrence of excessive resistance to coupling squeezing first of all check up a condition and correctness of a lining drive a cable, then remove a pedal and grease its axis. The Head Coupling more in detail see.


On the main page