Citroen Xantia

1. Make on the car a short trip, having warmed up transmission to normal working temperature. Be parked on an equal horizontal platform, whenever possible with a firm covering. Level check трансмиссионной liquids is made by means of special measuring probeа, the impellent compartment located in a forward part, directly ahead of the engine block. The handle top probeа for simplification of searches is usually painted in bright colour.

2. Leave the engine working on single turns and translate selector AT lever in position “Р”. Take probe from a directing tube and dry wipe its edge pure rags or a paper towel. Fill probe back, having planted it in a tube against the stop, then again take. On size of the moistened site of an edge define level ATF, - it should be between the top and bottom marks probeа.

3. In case of need make corresponding updating, having added demanded quantity of a liquid through directing tube probeа. For convenience take advantage of a funnel.

Watch, that level ATF did not rise above the top mark probeа.

4. Having finished updating, make on the car a short trip for the purpose of distribution ATF on surfaces of internal components of transmission, then repeat level check. In case of need add missing quantity of a liquid.
5. Watch, that liquid level constantly was in transmission between the bottom and top marks in an edge measuring probeа. Remember that lack ATF can lead to serious internal damages of transmission.
6. Necessity of frequent performance of updating of level ATF testifies to development of the leaks which source should be immediately revealed, and the reason is eliminated.