Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
- Routine maintenance
   + Weekly checks
   - Car routine maintenance - petrol models
      Regular service
      Replacement of impellent oil and the oil filter
      Check of a condition of hoses, and revealing of sources of leaks
      Check of adjustment of coupling
      Check of level ATF
      Suspension bracket and steering drive
      Check of a condition of protective covers of power shafts
      Reading of memory of the block of self-diagnostics
      Replacement of the dust removal filter (model with К/В)
      Check of a condition of a coolant of a central air of air
      Replacement of spark plugs
      Check of a condition of system of ignition
      Check and adjustment of turns and quality of a mix of idling
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases
      Check of a condition and replacement of a belt of a drive of auxiliary units
      Greasing of the mechanism of a drive of deenergizing of coupling
      Condition check колодок brake mechanisms of forward and back wheels
      Check of serviceability of functioning and adjustment of a lay brake
      Trial runs
      Replacement трансмиссионной liquids АТ
      Greasing of locks and loops
      Replacement of a filtering element of an air cleaner
      Level check трансмиссионного oils (models with РКПП)
      Replacement of the fuel filter
      Replacement of hydraulic liquid LHM and the returnable filter
      Check of a condition of brake supports, disks and hydraulic hoses
      Replacement of a belt of drive ГРМ
      Replacement of a cooling liquid
   + Car routine maintenance - diesel models
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ Electric equipment schemes





Check of a condition of protective covers of power shafts

THROUGH EACH 15 000 KM (9000 MILES) RUN OR TIMES IN 12 MONTHS

 PERFORMANCE ORDER

1. Поддомкратьте the car also establish it on props. Turn out a wheel against the stop and slowly rotate a forward wheel, visually estimating a condition of a rubber protective cover of an external SHRUS of a power shaft, periodically opening folds гофра. Presence of cracks, ruptures and traces of ageing of a material can lead to development of leaks of the greasing fraught with hit of a moisture and a dirt in the hinge and premature deterioration of last. Estimate reliability of fastening of a cover metal bandage tapes. Repeat check for an external SHRUS of the second power shaft, then estimate a condition of internal SHRUS. Defective covers are subject to replacement without fail (Power shafts see the Head).

2. Simultaneously it is necessary to estimate the general condition actually hinges for what grasp a power shaft and try повращать a wheel (an external SHRUS), then undertake an internal SHRUS and try повращать a shaft. Presence a little appreciable люфта testifies to deterioration of the corresponding hinge/shlitsov of a pin of a power shaft or easing of a fixing nut.


On the main page