Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
- 10. Transmissions and power shafts
+ 10.1. A mechanical transmission
- 10.2. An automatic transmission
10.2.1. A technical characteristics
10.2.2. Removal, installation and adjustment of a cable of the device kick-down
10.2.3. Removal, installation and adjustment of a cable of a choice of transfers
10.2.4. Replacement of the switch of blocking of a starter and backing lanterns
+ 10.2.5. A transmission
+ 10.3. Power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Elements of fastening of a cable of compulsory inclusion of a hill-climbing gear (kick-down) on the carburettor
|
|
And – fastening of a cover of a cable,
In – the spherical hinge of a cable |
Removal and installation
| PERFORMANCE ORDER |
| 1. Remove the air filter. |
| 2. Disconnect a cable of compulsory inclusion of a hill-climbing gear from the carburettor for what take скобу, крепящую a cable cover to an arm and using the lever, remove a cable from the spherical hinge of the lever of the carburettor. |
| 3. From outside transmissions unscrew tightening a bolt from the plug of a cover of a cable, move the plug upwards and disconnect a cable. |
| 4. Take the mechanism of adjustment of a tension of a cable from an arm for what press blocking ledges. |
| 5. Installation is made in sequence, return to removal. |
| 6. Then adjust a cable. |
|
Adjustment
| PERFORMANCE ORDER |
| 1. Check up that the accelerator cable has insignificant sagging at the released pedal of an accelerator. |
| 2. If necessary adjust a cable, rotating the persistent screw of a pedal of an accelerator. |
| 3. Ask the assistant to press slowly a pedal of an accelerator to a contact of its mechanism of compulsory inclusion of a hill-climbing gear. In this position throttle заслонка the carburettor it should be completely open. |
| 4. If necessary adjust the cable end on the carburettor. |
| 5. Ask the assistant to press an accelerator pedal against the stop. In the presence of correct adjustment, the ratchet of the self-regulated mechanism should publish clicks. |
| 6. The further adjustment of a cable is not required. |
| 7. Release a pedal of an accelerator and establish the air filter. |
|
|
On the main page
|