Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
- 1. The maintenance instruction
   1.1. Protection of environment and economy of energy
   1.2. A key
   + 1.3. A steering wheel
   1.4. Seats
   1.5. Headrests
   1.6. A seat belt
   1.7. Rear-view mirrors
   1.8. An adjustable external mirror with an electric drive
   1.9. The ignition lock
   + 1.10. Controls and control devices
   1.11. Body elements
   1.12. Luggage space increase at cars the Hatchback
   1.13. Luggage space increase at cars the Versatile person
   1.14. Adjustment of height of a back suspension bracket
   1.15. Safety
   1.16. Operation of belts
   + 1.17. Illumination
   1.18. Opening of glasses and the hatch
   1.19. Heating and ventilation
   1.20. An automatic transmission
   + 1.21. The catalyst
   1.22. An exhaust system, exhaust gases
   1.23. Instructions on driving
   1.24. Economy of fuel
   + 1.25. Wheels and tyres
   1.26. A spare wheel, a jack and the tool
   + 1.27. Bases of safe operation of the car
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

1.19. Heating and ventilation
THE GENERAL DATA

In the car the combined system of heating and ventilation is used. At the expense of mixing of cold and warm air temperature adjustment is carried out without a delay and on all speeds is kept by a constant.

The size of a stream of air is regulated by the fan.

External air is sucked in before a windscreen, if necessary is warmed up and goes to car salon.
Air removal is carried out or through lateral заслонки, or through back doors, or through plastic inserts which are closed by a back door (Van).

For heating of feet of back passengers the warmed-up air on channels under a carpet covering moves in a back part of salon.

Management of a heater

The left lever
Heating
Upwards
More warmly
Downwards
More coldly

Constantly hold opened giving of air and only temporarily close it (a smoke, unpleasant smells etc.) for what move the lever of distribution of a stream of air to the middle and close all nozzles of ventilation.

The right lever
Air distribution
Upwards
For defrosting
Downwards
For the top space
The bottom lever
Air distribution
Upwards
For the top space
Downwards
For feet, forward and back space

THE FAN

Air stream can be increased by means of the fan if it is necessary for increase in comfort or defrosting acceleration.

The arrow specifies 3 steps of the fan.

AVERAGE NOZZLES OF VENTILATION

Turn snuffled ventilation it is possible to change a direction of a stream of air. Nozzles open a wheel with накаткой.

At installation snuffled in the position specified in drawing, the narrow stream of air on the back passenger moves, thus influencing comfort of the driver and the forward passenger.

LATERAL NOZZLES OF VENTILATION

According to position of the left lever from snuffled cold or warmed-up air moves. Nozzles open a wheel with накаткой. In the fixed position About nozzles are closed.

Air stream can be increased by means of the fan.

Adjustment of a stream of air is carried out by turn and an inclination of plates snuffled.

The most comfortable position – when the stream of warm air is directed to a cold season along doors.

LATERAL DISK NOZZLES

If the top lever of distribution of air is moved upwards cold or warm air will move to a windscreen and lateral glasses (mainly in a zone of external mirrors).

SUMMER VENTILATION

For the maximum ventilation of the top part of salon completely open nozzles. The lever of distribution of air move to the middle.

For air giving to feet the lever of distribution of air move downwards.

The temperature lever move downwards.

HEATING

Through nozzles to a windscreen.

To feet.

Through lateral nozzles of ventilation.

The combined giving of air is possible.

Air stream can be increased by means of the fan.

Efficiency of heating depends on temperature of a cooling liquid, therefore heating is used only at the heated-up engine to normal working temperature.

Heating of feet

PERFORMANCE ORDER
1. For air giving to feet the lever of distribution of air move downwards. The temperature lever move upwards.
2. Increase a stream of air by means of the fan, having established it on the second step. Close the central nozzles of system of ventilation.

Removal of a moisture and defrosting of glasses

PERFORMANCE ORDER
1. All levers of the control panel a heater move upwards and include the heater fan.
2. Lateral nozzles can be opened and directed on lateral glasses.
3. Close the central nozzles.
4. Include a heater of back glass.

WARMED BACK GLASS

The heater of back glass works only at the working engine.

To switch off immediately as soon as the review will be free. Avoid unnecessary overloads of electric system.

At cleaning of an internal surface of back glass do not damage heater conductors.

LOBBIES OF SITTING WITH ELECTROHEATING

The push-button switch on the right.

The top switch – sitting of the driver.

The bottom switch – sitting of the forward passenger.


On the main page