| Cooling system |
| Type |
| Volume of a cooling liquid | Routine maintenance see the Head |
| The water pump |
| Type | Centrifugal, роторного type |
| The account characteristic of the water pump |
|
| Models 2.0 and 2.5 l |
|
| At 85°С and 760 rpm | 20 l/mines
|
| At 85°С and 3000 rpm | 100 l/mines
|
| At 85°С and 6000 rpm | 200 l/mines
|
| L models 3.0 |
|
| At 80°С and 5500 rpm | 320 l/mines
|
| Diameter drive a pulley (model 2.0 and 2.5), mm | 60
|
| Quantity of teeths приводной asterisks (model 3.0) | 22
|
| Diameter of a rotor (gear wheel), mm |
| Models 2.0 and 2.5 l | 76
|
| Models 3.0 of l 73. | 2
|
| Quantity of shovels of a rotor |
| Models 2.0 and 2.5 l | 8
|
| L models 3.0 | 6
|
| Backlash of landing of a rotor in the working chamber (model 2.0 and 2.5), mm |
| Rating value | 0.5 ÷ 0.7
|
| Limiting admissible value | 1.0
|
| Radial palpation of a rotor (model 2.0 and 2.5), mm | 0.5
|
| The thermostat |
| Type | Воскозаполненный
|
| Temperature of the beginning of opening, °С | 76 ÷ 80
|
| Temperature of full opening, °С | 91
|
| Height of lifting of the valve, mm | 9.0
|
| Diameter of the valve through passage, mm | 35
|
| Electric fans of system of cooling |
| Power consumption of the electromotor, Vt |
| Models 2.0 and 2.5 l |
| The main fan | 75
|
| The auxiliary fan | 75
|
| L models 3.0 |
| The main fan | 120
|
| The auxiliary fan | 120
|
| Diameter крыльчатки, mm |
| Models 2.0 and 2.5 l |
| The main fan | 300
|
| The auxiliary fan | 300
|
| L models 3.0 |
| The main fan | 320
|
| The auxiliary fan | 320
|
| Quantity of blades |
| Models 2.0 and 2.5 l |
| The main fan | 5
|
| The auxiliary fan | 4
|
| L models 3.0 |
| The main fan | 5
|
| The auxiliary fan | 7
|
| Radiator |
| Type | Tight, with a falling stream
|
| Heat exchanger type | With the goffered plates
|
| The sizes of the heat exchanger, mm |
| Models 2.0 and 2.5 l | 691.5 ÷ 340 ÷ 16
|
| L models 3.0 | 699 ÷ 349 ÷ 27
|
| Pressure of operation of the safety valve built in in a cover, кПа |
| The top |
|
| Rating value | From above 108 ± 15
|
| Limiting admissible value | 83
|
| The bottom | More low-1.0 ÷-4.9
|
| Volume of a broad tank, l |
| Models 2.0 and 2.5 l | 0.5
|
| L models 3.0 |
| 2001 вып. | 0.45
|
| 2002 вып. | 0.5
|
| Salon heating |
| The maximum capacity of return of the heat exchanger (at a difference of temperatures of a cooling liquid and entering air in 65°С and the expense of a liquid 360 л/ч), kw | 5
|
| Air expense in a mode of ventilation and the maximum warming up, м3 | 300
|
| The maximum expense of air (heating is disconnected, a mode of circulation, 4th high-speed mode of the fan), м3 | 500
|
| The sizes of the heat exchanger, mm | 193.5 ÷ 152 ÷ 35.0
|
| Type of the electromotor of a drive of the fan of a heater | Magnetic, with capacity not less than 200 Vt at pressure of a food 12 In
|
| Fan type | Centrifugal (SIROCCO)
|
| The sizes крыльчатки (diameter ÷ width), mm | 150? 75
|
| Air central air |
| The general parametres |
| Type of a coolant of oil | HFC-134a (CH2FCF3)
|
| Coolant volume, kg | 0.65 ± 0.05
|
| Хладопроизводительность, kw | 5.2
|
| Idling turns at included К/В (power supply system MPFI) | 850 ± 100
|
| The compressor |
| Compressor type | Rotary, with five shovels and with the fixed volume (DKV-14G)
|
| The expense, sm3/turn | 140
|
| The maximum admissible frequency of rotation, rpm | 7000
|
| Magnetic муфта couplings |
| Type | Dry, one-disk with a drive from a V-shaped belt
|
| Type drive a belt |
| Models 2.0 and 2.5 l | Многоручьевой 4 РК
|
| L models 3.0 | Многоручьевой 6 РК
|
| Power consumption, Vt | 38
|
| Diameter drive a pulley, mm | 125
|
| Transfer relations of a belt drive | 1.064:1
|
| The condenser |
| Type | The multiline
|
| Heat exchanger type | With the goffered plates
|
| The area of an obverse surface of the heat exchanger, м2 | 0.22
|
| Thickness of the heat exchanger, mm | 21
|
| The effective area of the heat exchanger, м2 | 6.52
|
| Receiver-dehumidifier |
| Effective internal volume, sm3 | 250
|
| The broad valve |
| Type | With the built in equalizer
|
| The evaporator |
| Type | The single-chamber
|
| The sizes, mm | 235? 224? 60
|
| The fan of giving of air |
| Type | Centrifugal (SIROCCO)
|
| The sizes (external diameter ÷ width), mm | 150 ÷ 75
|
| Power consumption (at a food in 12), Vt | 220
|
| The gauge-switch pressure (two-level) |
| Working pressure of operation низконапорного the gauge-switch, кПа |
| Вкл — Vykl | 177 ± 25
|
| Выкл — Vkl | 216 1
|
| Working pressure of operation высоконапорного the gauge-switch, кПа |
| Вкл — Vykl | 2942 ± 196
|
| Tipping over | 588 ± 196
|
| The thermocontrol amplifier |
|
| Activation temperature (air on an exit from the evaporator) |
| Efforts of a tightening of carving connections, Nanometer |
|
|
Efforts of a tightening of carving connections are resulted also in the text of the Head and on сопр. Illustrations. |
|
| Bolts of fastening of a cover of the thermostat | 6.4
|
| Bolts of fastening of casings of fans of system of cooling | 4.9
|
| Fastening bolts/nuts крыльчаток fans to electromotors |
| Models 2.0 and 2.5 l | 3.4
|
| L models 3.0 | 7.5
|
| Bolts of fastening of electromotors of fans | 4.4
|
| Bolts of fastening of a radiator |
| Models 2.0 and 2.5 l | 18
|
| L models 3.0 | 12
|
| Bolts of fastening of a broad tank | 4.9
|
| Bolts of fastening of lines of a path of cooling ATF | 12
|
| Boats of fastening of the water pump |
| Models 2.0 and 2.5 l |
| The first stage | 12
|
| The second stage | 12
|
| Models 2.0 and 2.5 l | 6.4
|
| Bolts and nuts of fastening of sections of a casing of a heater | 7.35
|
| Bolts of fastening of compressor K/V to basic arms | 28.9
|
| Bolts of fastening of basic arms of fastening of compressor K/V | 35
|
| Bolts of fastening of a cover of a belt of a drive of the compressor | 7.4
|
| Nut of fastening of a pulley of a drive of compressor K/V | 23
|
| Bolts of fastening of an arm of a tension roller of a belt of a drive of compressor K/V | 23
|
| Bolts of fastening of the condenser | 7.4
|
| Screws of fastening of a receiver-dehumidifier | 7.4
|
| Shtutsernye bolts of fastening of lines of a refrigerator path to compressor K/V | 15
|
| Shtutsernyj bolt of fastening of a line of a refrigerator path to receiver-dehumidifier К/В | 7.4
|
| Shtutsernyj bolt of fastening of a line of a refrigerator path to condenser K/V | 15
|