Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
- 10. A body
   10.1. Maintenance service and body repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of the lock of a cowl and a cable
   10.10. A forward lattice
   10.11. Bumpers
   10.12. The facing panel of a door
   10.13. An external mirror
   10.14. A door
   10.15. A forward wing
   10.16. A door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window lifter
   + 10.18. Glasses of doors
   10.19. Стеклоподъемник
   10.20. A lock clamp, the switch of the lock and door handles
   10.21. A casing of a steering column
   10.22. The central floor section
   10.23. Panels of forward facing of salon
   10.24. The panel of forward facing of salon
   10.25. An air inlet lattice
   10.26. Seats
+ 11. An electric equipment
+ 12. Electroschemes





10.11. Bumpers
THE GENERAL DATA

Bumper
1. An arm of an apron of a wing, left
2. A lateral arm, left
3. The turn index, left
4. The turn index, right
5. The buffer panel
6. A bumper
7. A lateral arm, right
8. An arm of an apron of a wing, right
9, 10. Forward arms (right and left)

Details of a back bumper

1. Back right грязеотражатель
2. A lateral overlay, right
3. An arm
4, 6. A sealant
5. An overlay
7. A lateral overlay, left
8. Back left грязеотражатель
9, 10. An arm
11. A bumper cross-beam

Removal and installation

PERFORMANCE ORDER
Forward bumper
1. Remove a forward lattice.
2. Remove indexes of turns.
3. Turn away bolts of fastening of a bumper to forward and lateral arms and remove a bumper.
4. Installation is carried out upside-down.
Back bumper
5. At bumper replacement be guided fig. of the Detail of a back bumper.
6. Installation is carried out upside-down.

On the main page