Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
- 10. A body
   10.1. Maintenance service and body repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of the lock of a cowl and a cable
   10.10. A forward lattice
   10.11. Bumpers
   10.12. The facing panel of a door
   10.13. An external mirror
   10.14. A door
   10.15. A forward wing
   10.16. A door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window lifter
   + 10.18. Glasses of doors
   10.19. Стеклоподъемник
   10.20. A lock clamp, the switch of the lock and door handles
   10.21. A casing of a steering column
   10.22. The central floor section
   10.23. Panels of forward facing of salon
   10.24. The panel of forward facing of salon
   10.25. An air inlet lattice
   10.26. Seats
+ 11. An electric equipment
+ 12. Electroschemes


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


10.8. A cowl

Removal and installation


The prevention

Works are carried out together.


PERFORMANCE ORDER
1. Open a cowl and close rags wings and an air inlet lattice.
2. Disconnect hoses стеклоомывателя.
3. Outline contours of loops of a cowl.
4. Enclose rags under cowl corners, ask the assistant to keep a cowl on the one hand, turn away bolts of loops and remove a cowl.
5. Installation is carried out upside-down.

Adjustment

After installation it is necessary to adjust latch position so that the cowl was densely closed, and the cowl surface was заподлицо with wings.

PERFORMANCE ORDER
1. Outline bolts of a latch of a clamp of a cowl.
2. Release bolts and move a clamp to the necessary position then bolts tighten.
3. Turning out or turning, adjust cowl buffers on a radiator rack so that the closed cowl was заподлицо with wings.
4. And a cowl loop it is necessary to grease a latch periodically литолом.

On the main page