Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
- 10. A body
   10.1. Maintenance service and body repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of the lock of a cowl and a cable
   10.10. A forward lattice
   10.11. Bumpers
   10.12. The facing panel of a door
   10.13. An external mirror
   10.14. A door
   10.15. A forward wing
   10.16. A door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window lifter
   + 10.18. Glasses of doors
   10.19. Стеклоподъемник
   10.20. A lock clamp, the switch of the lock and door handles
   10.21. A casing of a steering column
   10.22. The central floor section
   10.23. Panels of forward facing of salon
   10.24. The panel of forward facing of salon
   10.25. An air inlet lattice
   10.26. Seats
+ 11. An electric equipment
+ 12. Electroschemes

10.16. A door of a cargo compartment

Removal, installation and adjustment

The prevention

Works are carried out together.

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Open a door of a compartment and reliably fix.
3. To remove racks of a door of a cargo compartment, turn on top (a photo at the left) and the bottom bolts (a photo on the right).
4. To disconnect sockets of wires of a door, get a sealant.
5. Outline contours of loops on a door and turn away bolts (are specified by arrows).
6. Installation is carried out upside-down.
7. If it is necessary to replace the door lock remove the facing panel, a cover of a service aperture, a glass fringing, window lifter and directing (subsection 10.17 see).
8. For pusher removal turn away 2 nuts.
9. Remove a pusher and draught of remote opening of a door.
10. The overlay of a niche of licence plate fastens a nut and 5 latches.
11. Turn away a nut and remove an overlay, having hooked a scraper.
12. Turn away a nut and remove the lock switch, disconnect a socket.
13. Then find draught of the lock and disconnect a cable then disconnect draught.
14. Turn away 3 bolts (are specified by arrows) and remove the lock.
15. Installation is carried out upside-down.
16. For door adjustment in a direction release nuts of fastening of loops to a body "back-forward".
17. Easy blows displace a loop in the necessary direction and tighten nuts.
18. For door adjustment in directions "to the left-to the right" and "upwards-downwards" release bolts of fastening of loops to a door, displace a door in the necessary direction and tighten bolts.
19. For adjustment of a clamp of the lock release screws (are specified by arrows).
20. Easy blows displace a clamp before normal gearing with a clamp.
21. Tighten screws.
22. Installation is carried out upside-down.


On the main page