Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
- 10. A body
   10.1. Maintenance service and body repair
   10.2. Vinyl furnish
   10.3. An upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. A windscreen and motionless glasses
   10.8. A cowl
   10.9. A latch of the lock of a cowl and a cable
   10.10. A forward lattice
   10.11. Bumpers
   10.12. The facing panel of a door
   10.13. An external mirror
   10.14. A door
   10.15. A forward wing
   10.16. A door of a cargo compartment
   10.17. Glass of a door of a cargo compartment and window lifter
   + 10.18. Glasses of doors
   10.19. Стеклоподъемник
   10.20. A lock clamp, the switch of the lock and door handles
   10.21. A casing of a steering column
   10.22. The central floor section
   10.23. Panels of forward facing of salon
   10.24. The panel of forward facing of salon
   10.25. An air inlet lattice
   10.26. Seats
+ 11. An electric equipment
+ 12. Electroschemes

10.17. Glass of a door of a cargo compartment and window lifter
THE GENERAL DATA

Door of a cargo compartment
1. Стеклоподъемник
2. The right directing
3. Glass
4. A cover
5. A fringing
6. A sealant external
7. A casing
8. A sealant internal
 9. Door facing
10. A decorative overlay
11. A drum of the switch of the lock
12. A pusher
13. The lock
14. The left directing
15. A rack

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. For glass removal it is recommended to remove a door.
3. To remove the handle of a door of a back compartment, remove decorative заглушку.
4. Turn away a bolt and remove the door handle.
5. To remove door facing, disconnect 10 latches.
6. To uncover a service aperture, disconnect a socket and turn away screws.
7. Remove a glass fringing, уплотнители and glass.
8. Disconnect other sockets and remove window lifter (arrows specify fastening bolts window lifterа).
9. Installation is carried out upside-down.


On the main page