Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   + 3.1. 4-cylinder engines
   + 3.2. Engines V6 of 3,0 l (1993-1994) and 3,4 l (since 1995)
   - 3.3. Dismantle and engine major repairs
      3.3.1. Specifications
      + 3.3.2. Major repairs
      3.3.3. Diagnostics of the engine by means of the vacuum gauge
      3.3.4. Compression check in engine cylinders
      + 3.3.5. Dismantle of the power unit
      - 3.3.6. A head of cylinders
         3.3.6.1. Dismantling of a head of cylinders
         3.3.6.2. Clearing and check of a head of cylinders
         3.3.6.3. Assemblage
      3.3.7. Valves
      3.3.8. Shatunno-piston group
      + 3.3.9. Коленвал
      3.3.10. The block of cylinders
      3.3.11. Хоннингование cylinders
      + 3.3.12. Rods and pistons
      3.3.13. Radical and шатунные bearings
      3.3.14. Balansirnye shaft
      3.3.15. An assembly order
      3.3.16. Piston rings
      3.3.17. Start-up of the engine after repair and обкатка
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

3.3.6.3. Assemblage
THE GENERAL DATA

Before the assemblage beginning it is necessary to be convinced of cleanliness of a head of the block irrespective of out repairs of this detail in car-care centre were carried or not.

PERFORMANCE ORDER
1. If the block head was under repair in car-care centre measure spring height in the established condition.
2. Establish all details клапанного the mechanism upside-down.
3. At напрессовке маслосъемных caps remember that caps of inlet and final valves differ.
4. Before assemblage grease crackers for their time fixing.


On the main page