Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of position of a pedal of a brake
   10.3. The main cylinder of a brake
   10.4. The brake mechanism of a forward wheel of mark Teves
   10.5. The brake mechanism of a forward wheel of mark GIRLING
   10.6. A brake disk
   10.7. The case скобы and the piston
   10.8. The drum-type brake mechanism of a back wheel
   10.9. A brake drum
   10.10. The wheel brake cylinder
   10.11. The disk brake mechanism of a back wheel
   10.12. A pressure regulator
   + 10.13. A lay brake
   10.14. Antiblocking system of brakes (ABS)
   10.15. Prorolling of brake system
+ 11. A body
+ 12. An electric equipment


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


10.11. The disk brake mechanism of a back wheel
THE GENERAL DATA

The brake mechanism of a back wheel of mark Teves

1 – a brake disk;
2 – a bolt;
3 – brake колодка;
4 – a spring;
5 – the basis скобы;
6 – the case скобы;
7 – the rubber plug;
8 – a directing finger;
9 – a protective cap;
10 – a protective cover;
11 – the plastic plug;
12 – the valve of release of air;
13 – a protective cap;
14 – a cuff;
15 – the piston

The brake mechanism of a back wheel of mark GIRLING

1 – a cable of a drive of a lay brake;
2 – the holder;
3 – a rubber sealant;
4 – a beam of the back bridge;
5 – a brake board;
6 – a nave;
7 – a tip of a cable of a drive of a lay brake;
8 – a brake disk;
9 – brake колодка;
10 – a bolt;
11 – the basis скобы;
12 – the case скобы;
13 – a bolt;
14 – a clip;
15 – the valve of release of air;
16 – a protective cap;
17 – a sealing ring;
18 – the piston;
19 – a protective cover;
20 – грязезащитный a cover;
21 – a directing finger

Brake Pads and a brake disk replace to similarly forward brake mechanism (subsection 10.4 and subsection 10.6 see). After assemblage of the brake mechanism to adjust a lay brake (subsection 10.13.1 see).

On the main page