Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   - 6.1. The power supply system of carburettor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Replacement of the gauge of level of fuel
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin clearing of fuel
      6.1.12. Removal and carburettor installation
      + 6.1.13. Dismantling and carburettor assemblage
      + 6.1.14. Carburettor Pierburg adjustments 1B3
      + 6.1.15. Carburettor Pierburg adjustments 2Е2
      + 6.1.16. Carburettor Keihin adjustments
   + 6.2. The power supply system of engines with fuel injection
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.1. The power supply system of carburettor engines

6.1.1. Replacement of a filtering element of the air filter
THE GENERAL DATA

The air filter

1 – a guard of a fence of warm air;
2 – a collar;
3 – a hose of giving of warm air;
4 – spring скоба;
5 – a vacuum hose заслонки
Temperature regulator;
6 – заслонка a temperature regulator;
7 – a pneumodrive заслонки;
8 – a hose of giving of cold air;
9 – a temperature regulator;
10 – a clip of a cover of the filter;
11 – the filter case;
12 – a filtering element;
13 – a filter cover;
14 – the temperature regulator valve;
15 – a lining;
16 – a ventilation hose картера;
17 – a vacuum hose from the carburettor to the temperature regulator valve

PERFORMANCE ORDER
1. To unfasten clips or, if to eat, turn away two screws of fastening of a cover.
2. To uncover.
3. To take out filtering element.
4. With a pure rag to stop up an aperture in the carburettor. To wipe the case and a filter cover from within. To take out a rag from an aperture.
5. To insert a new filtering element.
6. To establish a cover. To clasp clips.


On the main page