Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   + 6.1. The power supply system of carburettor engines
   - 6.2. The power supply system of engines with fuel injection
      6.2.1. Replacement of a filtering element of the air filter
      6.2.2. Removal and installation of the air filter
      6.2.3. Replacement of the fuel filter
      6.2.4. Removal and installation of the distributor of fuel
      6.2.5. Dismantling and assemblage редукционного the valve
      6.2.6. Removal and installation of the fuel accumulator
      6.2.7. Removal and installation of fuel atomizers
      6.2.8. Removal and installation турбокомпрессора
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Removal and installation of the fuel pump
      6.2.11. Temperature regulator check
      6.2.12. Adjustment of idling of the engine
      6.2.13. Check of a starting atomizer
      6.2.14. Check of a regulator of pressure
      6.2.15. Check and adjustment of position of a plate of a measuring instrument of the expense of air
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.2. The power supply system of engines with fuel injection

6.2.1. Replacement of a filtering element of the air filter
THE GENERAL DATA

Details of the air filter

1 – a screw collar;
2 – a hose of giving of warm air;
3. – a hose of giving of cold air;
4 – a pipe of giving of cold air;
5 – tightening a collar;
6 – a filtering element;
7 – the filter case;
8 – the valve of braking by the engine;
9 – the fuel distributor;
10 – a branch pipe;
11 – a hose;
12 – a hose from the filter to the idling stabilizer;
13 – a filter cover;
14 – the thermostat;
15 – a temperature regulator

PERFORMANCE ORDER
1. To weaken a collar and to remove a pipe.
2. To unfasten spring clips of fastening of a cover and to remove it with a filtering element.
3. To take out an element from a cover.
4. To wipe the case and a cover of the filter from a dust and a dirt.
5. To insert into a cover a new filtering element.
6. To establish into place a cover and to connect to it a pipe.


On the main page