Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation


Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
- 10. Brake system
   10.1.2. Brake Pads forward brakes
   10.1.3. Brake Pads back brakes
   10.1.4. The general adjustment of back brakes (Girling)
   10.1.5. Replacement brake колодок (all-wheel drive models)
   10.1.6. The general adjustment of back brakes (Girling) (all-wheel drive models)
   10.1.7. Plugs of pedals of a brake and coupling
   10.1.8. Adjustment of a manual brake
   10.1.9. Removal of the lever of a manual brake
   - 10.2. Hydraulic components
      10.2.1. The hydraulic booster of brakes / the main brake cylinder
      10.2.2. Changes in hydraulic system
      10.2.3. The main brake cylinder / сервоцилиндр brake system
   + 10.3. Antiblocking system of brakes
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

10.2.1. The hydraulic booster of brakes / the main brake cylinder
THE GENERAL DATA

The hydraulic booster of brakes / the Main brake cylinder

1. A plug
2. A counternut
3. A fixing arm
4. The filter
5. The hydraulic booster of brakes
If it is faulty, replace entirely
On cars with the 5-cylinder engine the vacuum pump is established
6. A safety valve
7. A vacuum hose
8. The union with a clip
9. A washer
10. 25 Н.м.
11. The main brake cylinder
Do not assort
If it is faulty, replace entirely
12. Заглушка
Moisten in a brake liquid and establish in an aperture of the main brake cylinder
Establish a tank of a brake liquid in an aperture заглушки
13. A tank of a brake liquid
Fill with a brake liquid to mark MAX
14. The filter
15. A cap
16. An epiploon
17. A sealing ring, always replace
18. An arm
19. A washer
20. 20 Н.м.

The hydraulic booster of brakes / the Main brake cylinder

1. A cover
2. The screw of an aperture of descent of air
3. A dustproof cap
4. A safety valve
5. The main brake cylinder
Do not assort
Is not subject to repair
If it is necessary, replace entirely
6. 25 Н.м.
7. A dustproof cap
8. The screw of an aperture of descent of air
9. The distributive valve
It is not regulated
10. 20 Н.м.
11. An arm
12. The filter
13. An arm
14. 20 Н.м.
15. A sealing ring
Replacement: after hydraulic booster and arm installation, move a ring to the body panel
16. A counternut
17. A plug
18. 25 Н.м.
19. The body panel
20. 20 Н.м.
21. An arm
22. 10 Н.м.
23. An arm
24. A sealing ring
Always replace
25. The hydraulic booster
If it is faulty, replace entirely
26. Заглушка
Moisten in a brake liquid and establish in an aperture of the main brake cylinder
Establish a tank of a brake liquid in apertures заглушек
27. A tank of a brake liquid
The lateral union for coupling hydraulics
28. The filter
29. An epiploon


On the main page