Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
- 10. Brake system
10.1.2. Brake Pads forward brakes
10.1.3. Brake Pads back brakes
10.1.4. The general adjustment of back brakes (Girling)
10.1.5. Replacement brake колодок (all-wheel drive models)
10.1.6. The general adjustment of back brakes (Girling) (all-wheel drive models)
10.1.7. Plugs of pedals of a brake and coupling
10.1.8. Adjustment of a manual brake
10.1.9. Removal of the lever of a manual brake
+ 10.2. Hydraulic components
- 10.3. Antiblocking system of brakes
10.3.2. The hydraulic pump
10.3.3. The electronic block of management
- 10.3.4. Elements ABS of a forward wheel
10.3.4.1. Gauges of speed of rotation of forward wheels
+ 10.3.5. Elements ABS of back brakes
10.3.6. Broad-brush observations on repair
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment
|
Elements ABS of a forward wheel (models till January, 1989)
1. The rubber plug
Insert into an arm
2. The SHRUS with a rotor
The external SHRUS is on sale as spare honour with the established rotor
Put glue D6 on a junction of a semiaxis and a wheel nave
3. The gauge of speed
4. A sealing ring
Always replace
5. 10 Н.м. | 6. Самоконтрящаяся a nut
The moment of an inhaling 265 Н.м.
Always replace
Twist and turn off only when the car costs on the earth
At a twisting put glue D6 on a carving
7. A rack of the bearing of a nave of a wheel
Is on sale as the spare part with the established plug for fastening of the gauge of speed
8. An arm
For fastening of wires
9. 10 Н.м. |
Elements ABS of forward brakes (models after January, 1989)
1. Полуось and the SHRUS
Is on sale as the spare part with
The established rotor
Does not stick together with a wheel nave
The number of teeths on a rotor is reduced to half
In comparison with old updating
A little get the gauge of speed before semiaxis removal
2. The gauge of speed of rotation of a wheel is identical for
The left and right parties
For removal: simply pull out it from a nest
For installation: establish fingers against the stop
3. The fixing plug
For installation: grease with a liquid of the brake
The cylinder also establish in a nest of a rack of the bearing of a nave against the stop | 4. 200 Н.м.
After a twisting till the demanded moment of an inhaling turn in addition on a turn quarter (90о)
Always replace
Twist / turn off only when the car costs on the earth
5. A rack of the bearing of a nave
Is on sale as the spare part with an aperture for installation of the fixing plug and the gauge of speed |
|
On the main page
|