Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
- 2. Weekly checks and service in a way
   2.1. Check of tightness of connections
   2.2. If the engine is not started and the starter does not work
   2.3. If the engine is not started, even if the starter works normally
   2.4. Start from an external source (other car)
   2.5. Places of weekly checks
   2.6. Engine oil level
   2.7. Level of a cooling liquid
   2.8. Liquid level стеклоомывателя
   2.9. Level of a brake liquid
   2.10. Liquid level in system of a steering with the amplifier
   2.11. Electric system
   2.12. The accumulator
   2.13. Screen wiper brushes
   2.14. Tyres and pressure check in tyres
   2.15. Operational materials and liquids
   2.16. Pressure in tyres
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

2.12. The accumulator
THE GENERAL DATA

Cleanliness of the storage battery and, in particular, its top surface is especially important, as the layer of a dirt collecting on it easily forms electrospending lines which lead to the battery self-category. Cleanliness is important not only for a served accumulator room of the battery, together with for the unattended battery which, despite the name, is not absolutely unattended.

The accumulator is located on the left forward party of a motor compartment.

PERFORMANCE ORDER
1. Using a metal brush, clear plugs of the accumulator and the plug of wires. If necessary wash out plugs a soda solution in warm water. Be careful, that the soda solution has not got to accumulator banks.
2. Check up that nuts of a fixing element of the accumulator are reliably tightened. Do not draw a nut as the accumulator case can be damaged.
3. Before connection of clips of the accumulator grease plugs безкислотным with vaseline and anticorrosive компаундом.
4. Periodically (1 time a quarter) check up degree заряженности the storage battery for what measure electrolit density in banks of the storage battery.
5. Check up density of connection of clips of the accumulator () and integrity of isolation of wires ().
6. If on accumulator plugs there is a corrosion in the form of a white friable touch, disconnect plugs from the accumulator and clear their small wire brush.
7. Using a small wire brush, clear plugs on the wires connected to the accumulator.


On the main page