Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
- 2. Weekly checks and service in a way
   2.1. Check of tightness of connections
   2.2. If the engine is not started and the starter does not work
   2.3. If the engine is not started, even if the starter works normally
   2.4. Start from an external source (other car)
   2.5. Places of weekly checks
   2.6. Engine oil level
   2.7. Level of a cooling liquid
   2.8. Liquid level стеклоомывателя
   2.9. Level of a brake liquid
   2.10. Liquid level in system of a steering with the amplifier
   2.11. Electric system
   2.12. The accumulator
   2.13. Screen wiper brushes
   2.14. Tyres and pressure check in tyres
   2.15. Operational materials and liquids
   2.16. Pressure in tyres
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

2.13. Screen wiper brushes
THE GENERAL DATA

Check up a condition of brushes of a screen wiper. The faultless condition of brushes of a screen wiper is absolutely necessary condition for maintenance of good visibility.

To avoid deformation of brushes, it is necessary to clear regularly brushes of screen wipers means for washing of glasses. At strong pollution of brushes, for example, the rests of insects, it is necessary to make clearing of brushes by means of a sponge or a pure rag.

For safety reasons it is necessary to replace brushes of screen wipers alternate years.

At frosts before each inclusion of screen wipers first during a trip it is necessary to check up, whether brushes have frozen to glass.

Check of a condition and replacement of brushes of a screen wiper

PERFORMANCE ORDER
1. If screen wiper brushes are damaged or worn out, it is necessary to replace them. Periodic replacement of brushes of a screen wiper is made once a year.
2. For removal of a brush of a screen wiper take away the lever of a screen wiper from glass before its fixing. Turn a brush on 90 °, then compress скобу blockings and separate a brush from the lever.


On the main page