| Coupling |
| The general parametres |
| Liquid of a hydraulic drive of coupling FMVSS № 116, or a brake liquid of type DOT3 or DOT4 |
| Size выступания плунжера the coupling gauge-switch (disconnection of a chain of a starter), mm | 2+1.5 |
| Basket |
| Loading диафрагменных springs, kg |
| The European models | 550 |
| The American models |
|
| L models 2.0 | 450 |
| L models 2.5 | 580 |
| Frictional (conducted) disk |
| The sizes of a frictional disk (plank beds. ÷ ÷ внутр. ÷ ÷ a thickness), mm |
| The European models | 228.6 ÷ 155 ÷ 6.6 |
| The American models | 225 ÷ 150 ÷ 3.5 |
| External diameter шлицевого connections of a frictional disk, mm | 25.2 |
| The minimum admissible residual thickness of frictional overlays (height выступания their surfaces over heads of rivets), mm | 0.3 |
| Limiting admissible size of palpation of a frictional disk on radius of 107 mm, mm | 1.00 |
| The deenergizing lever |
| Factor of transfer of the lever | 1.6 |
| Size of a course of the lever, mm | 12 ÷ 13.6 |
| Pedal |
| Full speed size, mm | 130 ÷ 135 |
| Size lateral люфта педели couplings at effort 10 Н (on колодке), mm | 5 |
| The vyzhimnoj bearing |
| Limiting admissible size radial люфта, mm | 1.4 |
| Forward power shafts |
| Assemblage type (models with РКПП) | BJ87+SFJ82 |
| Diameter, mm |
|
| Models 2.5 of l with РКПП | 28 |
| Other models | 26 |
| Colour of protective covers of SHRUS |
| Models 2.5 of l with РКПП | The pink |
| Other models | -
|
| Effort of a tightening of bandage tapes of protective covers of SHRUS, Nanometer |
| Tapes большего diameter | Not less than 157 |
| Tapes of smaller diameter | Not less than 133 |
| Back power shafts |
| Type and identification marks of a back power shaft |
| Models 2.0 of l with АТ 79AC (without identification накаток) |
|
| Models 2.0 of l and 2.5 l with РКПП and models 2.5 of l with АТ (without VDC) | 79AC-RH, 79AC-LH (one identification накатка) |
| Models 3.0 of l and 2.5 l with АТ | (c VDC) B2AC-RH, B2AC-LH (two identification накатки) |
| Kardannyj shaft |
|
| Geometrical parametres, mm |
| Distance between forward карданным and central hinges (L1), mm |
| Models about the shock-absorber | 629 |
| Models with РКПП | 688 |
| Distance between back карданным and central hinges (L2), mm | 773 |
| Diameter of pipes |
| D1 | 63.5 |
| D2 | 57.0 |
| Limiting admissible size of palpation of sections карданного a shaft (in the central part of pipes), mm | 0.6 |
| Back differential |
| Type |
| Models Legacy |
| L models 2.0 |
| WITH АТ | VA-type (XJ) |
| WITH РКПП | T-type (T1) |
| L models 2.5 |
| WITH АТ | T-type (T2) |
| WITH РКПП | T-type (VB) |
| Models Outback |
|
| L models 2.5 |
|
| With АТ (without VDC) | T-type (TP) |
| The North America | T-type (T2) |
| Latin and the South America | T-type (CF with LSD) |
| With АТ (with VDC) | T-type (BL) |
| WITH РКПП | T-type (T1) |
| L models 3.0 (with АТ and with VDC) | T-type (Т2) |
| The transfer relation |
| Models Legacy |
| L models 2.0 |
| WITH АТ | 4.111:1 (37/9) |
| WITH РКПП | 3.900:1 (39/10) |
| L models 2.5 |
| WITH АТ | 4.111:1 (37/9) |
| WITH РКПП | 3.700:1 (37/10) |
| Models Outback |
| L models 2.5 |
| WITH АТ | 4.444:1 (40/9) |
| WITH РКПП | 4.111:1 (37/9) |
| L models 3.0 | 4.111:1 (37/9) |
| Type of oil of back differential | GL-5 |
| Transfer type | гипоидная |
| Volume of oil of back differential, l | 0.8 |
| Pretightness of forward and back bearings (on болтовом an aperture of a connecting flange), Н |
| T-type |
| New bearings | 19.6 ÷ 28.4 |
| Reusable bearings | 8.34 ÷ 16.67 |
| VA-type |
| New bearings | 12.7 ÷ 32.4 |
| Люфт gearings of lateral gear wheels, mm |
| T-type | 0.10 ÷ 0.20 |
| VA-type | 0.05 ÷ 0.15 |
| Standard width of lateral gear wheels, mm | 20.00 |
| Люфт gearings корончатой conducted and leading gear wheels of mm |
| T-type | 0.10 ÷ 0.20 |
| VA-type | 0.10 ÷ 0.15 |
| Palpation корончатой gear wheels (on a back surface), no more, than mm | 0.05 |
| Resistance of a leading gear wheel to rotation, Н | 2.9 ÷ 10.8 |
| Efforts of a tightening of carving connections, Nanometer |
|
|
Efforts of a tightening of carving connections are resulted also in the text of the Head and on сопр. Illustrations. |
|
| Coupling |
| Bolts of fastening of a basket of coupling | 15.7 |
| Bolts of fastening of a flywheel | 72 |
| Spherical emphasis of the lever of deenergizing of coupling | 15.7 |
| Nuts of fastening of the main cylinder of coupling | 18 |
| Shtutsernye nuts of a tube of a hydrodrive of coupling | 15 |
| Bolt of fastening of an arm of a hose of a hydrodrive of coupling | 37 |
| Bolts of fastening of the executive cylinder of coupling | 37 |
| Shtutsernyj bolt of fastening of a hose of a hydrodrive of coupling to the executive cylinder | 18 |
| The gate of prorolling of the executive cylinder of coupling | 8 |
| (A counternut of the gauge-switch of coupling of model with темпостатом) | 8 |
| Counternuts of the gauge-switch of stoplights | 8 |
| Counternut of a rod of a pusher of the main cylinder of coupling | 10 |
| Forward power shafts |
| Stupichnaja nut | 216 |
| Wheel nuts | 88 |
| Самоконтрящаяся a nut of fastening of a rack of a suspension bracket to a rotary fist | 177 |
| Bolts of a brake board to a rotary fist | 18 |
| Back power shafts |
| Stupichnaja nut | 186 |
| Wheel nuts | 88 |
| Fastening bolts ступичного the bearing | 66 |
| Kardannyj shaft and back differential |
|
| Bolts of a basic arm of the central bearing карданного a shaft | 52 |
| Fastening nuts карданного a shaft to a connecting flange of a leading gear wheel of back differential | 31 |
| Drain and jellied stoppers of back differential |
| T-type | 49 |
| VA-type | 34 |
| Самоконтрящаяся a nut of fastening of a connecting flange of back differential |
| T-type | 181 |
| VA-type | 188 |
| Bolts of fastening of a forward beam of back differential |
| The central | 65 |
| The axial | 110 |
| Самоконтрящиеся nuts of fastening of back differential to a back cross-section beam | 70 |
| Nuts of fastening of protection of back differential | 65 |
| Nut of a leading gear wheel of back differential | 181 |
| Fastening bolts корончатой a conducted gear wheel |
|
| T-type | 103 |
| VA-type | 62 |
| Bolts of fastening of holders of lateral bearings | 10.3 |
| Bolts of fastening of a back cover |
|
| T-type | 29 |
| VA-type | 25 |
| Bolts of fastening of a blocking plate of the holder of the lateral bearing (VA-type) | 25 |