Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
- Coupling
   Specifications
   + Flywheel and coupling
   - Приводные and карданный shaft, back differential
      Drive of forward wheels - the general information
      Removal and installation of rotary fists, service ступичных assemblages of forward wheels
      Removal, service and installation of a forward power shaft
      Drive of back wheels - the general information
      Removal and installation ступичных assemblages of back wheels, replacement back ступичного the bearing
      Removal, check of a condition and installation of components карданного a shaft
      Check of a condition and replacement of a forward epiploon of back differential
      Removal, service, installation and adjustment of back differential of T-type
      Removal, service, installation and adjustment of back differential of VA-type
      Removal, installation and check of a condition of a forward beam of fastening of back differential
      Removal, service and installation of a back power shaft
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Приводные and карданный shaft, back differential

Drive of forward wheels - the general information

Details of connection of a power shaft to a nave of a forward wheel

1 — the External SHRUS
2 — the Rotary fist
3 — the Rotor of wheel gauge ABS
4 — the Bearing
5 — Stupichnaja a nut

6 — the Nave
7 — the Epiploon
8 — the Brake board
9 — the Reflective plate
10 — the Wheel bolt


Power shafts from both ends are equipped by hinges of equal angular speeds (SHRUS)

1 — the Internal SHRUS (триподный вибропоглощающий the hinge of free rotation) 2 — the External SHRUS

For transfer of a twisting moment from lateral gear wheels of forward differential трансмиссионной assemblages to car driving wheels serve forward power shafts.

Details of a joint of a power shaft with ступичной assemblage of a forward wheel are shown on an illustration.

The internal ends of both power shafts are entered into gearing with transmission by means of hinges of equal angular speeds (SHRUS) with a working angular range in 25 . On type internal SHRUS concern to триподным вибропоглощающим to hinges of free rotation. Unlike the external SHRUS rigidly fixed in naves of forward wheels, internal hinges possess moving freedom in an axial direction. External hinges differ a wide working angular range (to 47.5 ). In aggregate hinges provide smoothness and uniformity of rotation of driving wheels with a minimum level of transferred vibrations.

Naves of forward wheels are fixed in rotary fists by means of planted with a pretightness noncontrollable конусных roller bearings. Shaft of external SHRUS are passed in naves and fixed chromeplated and ступичными by colour nuts khaki.

 On l models 3.0 naves with induction training are established.


Brake disks established outside, for simplification of service fasten to disks of wheels by means of wheel bolts.
On the main page