Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   - 7.3. Карданный () a shaft () and карданные hinges
      7.3.1. Check карданных shaft
      7.3.2. Removal and installation карданного a shaft
      7.3.3. Replacement карданных hinges
   7.4. Back and forward axes
   7.5. The bearing, an epiploon and полуось the back bridge
   7.6. An epiploon of a reducer of the back bridge and a forward axis
   7.7. The back bridge
   7.8. Forward semiaxes
   7.9. Replacement of covers and SHRUS dismantling
   + 7.10. An electromagnetic drive of a forward leading axis (ADD-system)
   7.11. A forward reducer
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





7.3.2. Removal and installation карданного a shaft
PERFORMANCE ORDER
1. Lift also a back part of the car.
Back shaft
2. Designate mutual position of flanges карданного a shaft and a leading gear wheel of a reducer.
3. Keeping bolts, turn away four nuts of fastening of a flange of a back shaft.
4. Disconnect карданный a shaft from a back flange. Get a shaft from transmission or a distributing box, or turn away bolts of fastening of the hinge to a flange of a distributing box.
5. On rear-wheel cars muffle an aperture in a transmission.
6. Installation is carried out upside-down. Combine the labels put at dismantling and tighten nuts with the set moment.
Forward shaft
7. Remove a protective casing of a forward shaft.
8. Designate mutual position of flanges of a reducer, a distributing box and карданных hinges.
9. Keeping bolts, turn away a nut of fastening of a shaft and remove a shaft.
10. Installation is carried out upside-down. Combine the labels put at dismantling and tighten nuts with the set moment. At first fix a shaft on a forward reducer, having tightened nuts by hand, and then – on a distributing box. Tighten bolts and nuts with the set moment.

On the main page