Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

7.3.3. Replacement карданных hinges

PERFORMANCE ORDER

1. Remove карданный a shaft. 2. On a part of cars type hinges "double кардан" which are not subject to repair are established. In this case varies карданный a shaft in gathering. 3. Clamp a shaft in a vice, designate position of plugs of the hinge and get lock rings. The prevention Lock rings of bearings of hinges can be located in external or in an internal part of the needle bearing крестовины. In the first case the ring is taken пассатижами, in the second – a way выбивания from a flute in a bearing glass. 4. Выпрессуйте a bearing glass. For this purpose establish крестовину in a vice through the plug on the one hand and through оправку with another. Compress a vice until then while the bearing glass will not appear at the edge of a plug. 5. An alligator wrench or flat-nose pliers get a bearing glass. 6. Rearrange оправку and the plug and выпрессуйте an opposite glass. 7. Carefully clear a plug. 8. Establish крестовину and insert a glass into a plug. Сориентируйте крестовину so that the butterdish direction coincided with a butterdish direction on the opposite end of a shaft (if butterdishes are provided). 9. Insert крестовину into the bearing, insert the opposite bearing. Cautiously, without having damaged epiploons, запрессуйте bearings, having combined them with necks крестовины. 10. Establish rings. If necessary пристукните strong blow on a plug, that steel rings in a place. If rings do not come into flutes disassemble the hinge and check up freedom of rotation of bearings on necks крестовины. 11. Establish a shaft. Grease крестовины (if there are butterdishes).