Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   + 6.1. The power supply system of carburettor engines
   - 6.2. The power supply system of engines with fuel injection
      6.2.1. Replacement of a filtering element of the air filter
      6.2.2. Removal and installation of the air filter
      6.2.3. Replacement of the fuel filter
      6.2.4. Removal and installation of the distributor of fuel
      6.2.5. Dismantling and assemblage редукционного the valve
      6.2.6. Removal and installation of the fuel accumulator
      6.2.7. Removal and installation of fuel atomizers
      6.2.8. Removal and installation турбокомпрессора
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Removal and installation of the fuel pump
      6.2.11. Temperature regulator check
      6.2.12. Adjustment of idling of the engine
      6.2.13. Check of a starting atomizer
      6.2.14. Check of a regulator of pressure
      6.2.15. Check and adjustment of position of a plate of a measuring instrument of the expense of air
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.2.4. Removal and installation of the distributor of fuel
PERFORMANCE ORDER
1. To lower pressure in the power supply system (subsection 6.2.2 item 3 see).
2. To mark and disconnect топливопроводы from the fuel distributor (fig. Basic elements of system of injection of fuel see), having turned away fastening bolts.
3. To turn away three screws of fastening of the distributor and to remove the distributor. Thus to watch, that from below of the case has not dropped out плунжер. If плунжер has casually dropped out, to wash out it in gasoline and to insert into the distributor case the open end downwards.
4. To establish the distributor upside-down, having replaced a sealing ring of the case of the distributor. Before distributor installation to check up, that плунжер freely moved upwards-downwards. Screws of fastening of the distributor законтрить a paint.


On the main page