Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   + 6.1. The power supply system of carburettor engines
   - 6.2. The power supply system of engines with fuel injection
      6.2.1. Replacement of a filtering element of the air filter
      6.2.2. Removal and installation of the air filter
      6.2.3. Replacement of the fuel filter
      6.2.4. Removal and installation of the distributor of fuel
      6.2.5. Dismantling and assemblage редукционного the valve
      6.2.6. Removal and installation of the fuel accumulator
      6.2.7. Removal and installation of fuel atomizers
      6.2.8. Removal and installation турбокомпрессора
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Removal and installation of the fuel pump
      6.2.11. Temperature regulator check
      6.2.12. Adjustment of idling of the engine
      6.2.13. Check of a starting atomizer
      6.2.14. Check of a regulator of pressure
      6.2.15. Check and adjustment of position of a plate of a measuring instrument of the expense of air
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment



6.2.5. Dismantling and assemblage редукционного the valve
PERFORMANCE ORDER
1. To lower pressure in the power supply system (subsection 6.2.2 item 3 see).
2. To turn out a stopper of the valve from the distributor case (fig. Basic elements of system of injection of fuel see). To remove a sealing lining of a stopper.
3. To take out a sealing ring, adjusting washers, a spring, плунжер and the second sealing ring. Defective details to replace. It is not recommended to change adjusting washers not to break valve adjustment.
4. To collect the valve upside-down, having replaced sealing rings. To tighten a stopper of the valve the moment 25 Нм (2,5 кгсм).

On the main page