Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   + 6.1. The power supply system of carburettor engines
   - 6.2. The power supply system of engines with fuel injection
      6.2.1. Replacement of a filtering element of the air filter
      6.2.2. Removal and installation of the air filter
      6.2.3. Replacement of the fuel filter
      6.2.4. Removal and installation of the distributor of fuel
      6.2.5. Dismantling and assemblage редукционного the valve
      6.2.6. Removal and installation of the fuel accumulator
      6.2.7. Removal and installation of fuel atomizers
      6.2.8. Removal and installation турбокомпрессора
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Removal and installation of the fuel pump
      6.2.11. Temperature regulator check
      6.2.12. Adjustment of idling of the engine
      6.2.13. Check of a starting atomizer
      6.2.14. Check of a regulator of pressure
      6.2.15. Check and adjustment of position of a plate of a measuring instrument of the expense of air
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.2.2. Removal and installation of the air filter
THE GENERAL DATA

Basic elements of system of injection of fuel
1 – a sealing ring;
2 – a thermoswitch;
3 – an atomizer;
4 – the case of the air filter;
5 – a measuring instrument lining;
6 – a measuring instrument of the expense of air;
7 – a stopper;
8 – редукционный the valve;
9 – the fuel distributor;
10 – bringing топливопровод;
11 – a collar;
12 – an air line;
13 – the fuel filter;
14 – the frequency valve;
15 – the fuel accumulator;
16 – топливопровод the return plum;
17 – a starting atomizer;
18 – a lining;
19 – a pressure regulator

PERFORMANCE ORDER
1. To disconnect a wire from "the minus" plug of the storage battery.
2. To uncover the filter with a filtering element (fig. of the Detail of the air filter and subsection 6.2 subitem 1-2 see).
3. To weaken an inhaling of a bolt of fastening bringing топливопровода (fig. Basic elements of system of injection of fuel see) to a pressure regulator, to lower pressure in the power supply system. After that to tighten a fastening bolt топливопровода.
4. To mark and disconnect топливопроводы from the fuel distributor, having turned away fastening bolts.
5. To weaken an inhaling of a collar and to disconnect an air line from a measuring instrument of the expense of air.
6. To turn away bolts of fastening and to remove a measuring instrument of the expense of air together with the distributor of fuel established on it.
7. To turn away a bolt of fastening of the air filter, to disconnect the holder and to remove the filter case.
8. To establish the air filter upside-down.


On the main page