Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation

Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
- 9. Suspension brackets, wheels
   9.1.1. Elimination of a resonance / of vibration of a cross-beam (4-cylinder models)
   9.1.2. Change of a design of a forward suspension bracket
   9.1.3. Полуось
   9.1.4. A suspension bracket rack
   9.1.5. SHRUS
   9.1.6. A suspension bracket rack (all-wheel drive models)
   9.1.7. SHRUS (all-wheel drive models)
   - 9.2. A back suspension bracket
      9.2.1. An oil cap
      9.2.2. Bearings of a nave of a wheel
      9.2.3. Removal and installation of the back bridge
      9.2.4. A suspension bracket rack
      9.2.5. Change of a design of a back suspension bracket
   + 9.3. Wheels and tyres
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

9.2.5. Change of a design of a back suspension bracket

THE GENERAL DATA

The prevention
The modified elements of a suspension bracket cannot be established on cars of old models.

Change of a design of a back suspension bracket of the models which are let out since 1990 – for all-wheel drive models

1. A rack of the shock-absorber / of the bearing of a nave of a wheel with ears for fastening of connecting draught of the stabilizer of cross-section stability
2. 25 Н.м., always replace
3. Connecting draught
4. Cross-section draught length of the modified cross-section draughts differs from length of draughts of old model
5. 45 Н.м., always replace
6. Самоконтрящаяся a nut, always replace
7. The stabilizer of cross-section stability
8. A cross-beam of a back suspension bracket
The arm of fastening of cross-section draught / of the stabilizer of cross-section stability is modified
9. The rubber plug
10. 90 Н.м.
Tighten, only when the car costs on the earth
11. A clip
12. 35 H.м.

On the main page