- For the control of level of a liquid to leave the engine to idle.
- To put wheels in direct position.
- The liquid should be between marks «max» and «min».
- The marks located sideways are visible not at all models. In this case it is necessary to use probe, being under a tank cover.
- To turn off a cover (it is cautious, a spring) to wipe probe a pure rag, a cover to put on a bulk aperture (not to fasten). Again to uncover and check up oil level on probeе. It should be between marks.
- If necessary to add a liquid to a mark «max».
- In any case loss of a working liquid specifies in a leak in system. In this case it is important to find at first a leak place, and only then to add a liquid.
|
|