At ignition inclusion all lamps of control check light up. If all controllable functions are perfectly in order, lamps approximately in 4 seconds die away.
Indication of brake fires dies away, when after use of brakes control check will check their working capacity.
Control check carries out the control of level of liquids, thickness of brake overlays of forward disk brakes, and also headlights of external light, including wires and safety locks. At check of headlights malfunction is registered only in case of inclusion of a corresponding chain.
Corresponding indication of malfunction lights up in case:
– One of lamps near or a tail light has fused;
– One of stoplight lamps (as well on the trailer if the manufacturer provides the device for the trailer) has fused;
– Too low level of a cooling liquid in a broad tank;
– Too low level of engine oil at inclusion of ignition or after the previous trip;
– Too low level of a brake liquid;
– Brake overlays of forward disk brakes communicated till the minimum thickness;
– Too low level of a liquid in a washer of glasses.
Definition of level of oil is made after ignition inclusion. If oil level in norm, a control lamp dies away.
Repeated measurement of level of oil occurs, if after deenergizing and ignition inclusion has passed at least 4 minutes necessary for running off of oil in the oil pallet.
If level of oil below norm, a control lamp does not die away and burns before ignition deenergizing. Repeated measurement of level of oil occurs, if after deenergizing and ignition inclusion has passed at least 30 seconds.
If the car costs on a bias in 15 % or is inclined to the right on 10 %, the control lamp will burn even at normal quantity of oil.
If the control lamp blinks, damage маслопровода is possible. Check up oil level. Address on servicing deport.
|