Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   + 3.1. Maintenance service of cars with petrol engines
   - 3.2. Maintenance service of cars with diesel engines
      3.2.1. Operational materials and liquids
      3.2.2. Refuelling capacities
      - 3.2.3. Periodicity of service
         + 3.2.3.1. Each 400 km
         + 3.2.3.2. Each 7 500 km
         - 3.2.3.3. Each 15 000 km or 12 months
            3.2.3.3.1. Check and adjustment of turns of idling
            3.2.3.3.2. Check and adjustment of limiting turns of the engine
            3.2.3.3.3. Replacement of a fuel filtering element
            3.2.3.3.4. Check подтеканий liquids
            3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)
            3.2.3.3.6. Check drivers belts (diesel engines 16D and 16DA)
            3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
            3.2.3.3.8. Check of a condition and a tension of a gear belt
            3.2.3.3.9. Replacement of candles накаливания
            3.2.3.3.10. Replacement of a cooling liquid
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





3.2.3.3.2. Check and adjustment of limiting turns of the engine
THE GENERAL DATA

THE DIESEL ENGINE 17D

ТНВД type Bosch VE

Adjustment procedure is resulted in subsection 6.3.8. Keep in mind that on ТНВД these engines the adjusting screw of limiting turns which is sealed up by a lead seal is provided. After adjustment the screw should be sealed tightly up, therefore the given procedure is recommended to be carried out in car-care centre Bosch.

ТНВД type Lucas/CAV

Limiting turns are regulated industrially by installation of the restrictive screw which appointment is described in subsection 6.3.8. It is the screw which is sealed up by a lead seal. While in service there is no necessity to regulate limiting turns. However if such necessity has arisen, it is necessary to address to experts Lucas/CAV.

DIESEL ENGINES 17DR

ТНВД type Bosch VE

The screw of adjustment of limiting turns ТНВД of type Bosch VE (17DR)

1 – a counternut,

2 – the adjusting screw

The description of procedure of adjustment is resulted in subsection 6.3.8. The arrangement of adjusting screws is specified in drawing.

Keep in mind that on part ТНВД of these engines the adjusting screw of limiting turns is closed by a lead seal. After adjustment the screw should be sealed tightly up, therefore the given procedure is recommended to be carried out experts Bosch in the given kind of the equipment.

ТНВД type Lucas/CAV

The screw of adjustment of limiting turns ТНВД of type Lucas/CAV (17DR)

1 – a seal,

2 – the restrictive screw

On the main page